This is a very handy and compact bike pump and tyre accessory kit, the pump attaches nicely to the bottle cage which means that this is always with you.I like that there is a small length of hose with this which makes it easier to use when pumping the tyres.

Excellent mini-pump. First time I've used one of these and I'm very impressed. The main valve-outlets on the pump itself are for Schrader and Presta tire valves, the most common found on bikes. Simple pull the top of the pump with the valve holes outward and it extends on a small rubber tube, allowing you to best position it. Then you just clip the relevant hole over your bike valve (after removing the bike valve cover, obviously!) pull back on the level to lock it into place, then pump. Simple and effective.Comes with additional loose valve accesories for other styles of valve, and a handy strap accessory so you can fit it ti your bike frame.An excellent product. 5 stars.

Compact light pump, with clever telescopic design. Easy to use and comes with mounting accessories to aid mounting to your frame. Supports multiple valve types and also contains puncture repair accessories. - tyre levers, patches etc. At £11, it's good value too.

If I could give this more stars I would. I actually already have one of these that I purchased for my girlfriend's bike, and it was better than the one I got for my own so I had to have another one.This is meant to be used as an emergency device, but it can be used as your only pump if you're a patient person. I put new tires on my bike with this, because I didn't have a proper floor pump at the time. It does take some doing to fully fill a tire from zero, but it isn't difficult, just time consuming. I pumped two tires to around 40psi with it and the little pump held up great. That was plenty of pressure to get me going while I waited on a full size pump to arrive.The size is just right, it easily fits in a frame bag, handle bar bag, or you can use the supplied bracket, screwed to a bottle cage mount. You can use it along with a cage as well, you simply put this under it.I did use the supplied tire pry bars when I changed my tires. They worked great, no problems at all. Tire pry bars really make life easier on your fingers when removing or putting a tire on a rim.This little guy is a steal for the price, and priceless when you need it.

Was looking for a small bike pump that supported Presta and Schrader valves that could be carried on a bike, and this seemed like a good solution. The bike pump is quite small, comes with a bracket that can mount in the standard water bottle screw mount (and still allow another mount on top), and is lightweight (pump + bracket is 4.4oz/125g). The valve adapter has an extendable hose to make attachment easier. It also comes with some self adhesive patches, an abrasion tool, two tire removal tools, and needles/valves to pump up other items.Using the pump is straight forward. Clamp the pump head to the valve (unlocking and extending the head if desired), hold the plastic grip near the head, and pump with the cylinder portion of the pump. Attaching and detaching was easy and leak free. The pump claims it supports up to 100psi, but I did not test that. It does get a bit harder to pump the higher pressure the tire.The pump seems reasonably well constructed for a lightweight pump and should be sufficient for emergency use. It does not have a cover for the head, so if you use the mount instead of storing it in a protected bag, you may want to check/clear the valve head before attempting to use.One improvement that could be made is that it is not easy to grip the cylinder of the pump in order to pump, unless you place your hand over the end of the pump cylinder. The plug on the end is softer rubber, so not too uncomfortable, but some knurling or anti-slip on the tube would help with pumping without the pressure point in your palm. Since the pump cylinder is so small, pumping all but the lowest volume tires would take some time, so this would be better suited for a road bike than the larger tires of a cruiser or mountain bike.I did not try the patch kit or the tire removal tools, but they appear that they should work in a pinch. Since the patches are adhesive, there is no glue to worry about, but I would worry that the patches may not stick/seal permanently. Enough to get you home without having to walk, but you may want to patch/replace the tube once you are back home.Pros:-Small and lightweight.-Comes with mount that can be stacked on a standard bottle mount.-Fits Schrader and Presta valves.-Comes with temporary patch kit and adapters for other inflatablesCons:-Very small air volume, so would be slow to pump up a tire.-Limited ability to grip for pumping.-Patch kit is for temporary, emergency use only.This pump is definitely not what you want to use if you are pumping up multiple tires. But if you are on the road and need a pump, it certainly beats walking. It would also be sufficient for topping up a tire that is just a bit low on air. It is lightweight enough that you would hardly notice carrying it along on any ride and the mount gives it a nice place to be stored if you don't have a bag. So, overall, for its intended purpose it hits the mark and if you are looking for a lightweight pump for emergency use, I would suggest giving this pump a try.