Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Description
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
Key Features
5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
- 1.65 V to 5.5 V application voltage supported on SWIM interface
- SWIM low-speed and high-speed modes supported
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
- SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG specific features
- 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
- JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 °C
PACKAGE CONTENT
- ST-LINK/V2 × 1
- USB type A to Mini-B cable × 1
- 20-pin JTAG/SWD flat ribbon × 1
- 4-pin SWIM cable × 1
- 4-pin SWIM custom connector cable × 1
www.waveshare.com/wiki/ST-LINK/V2_(CN)
Jack
Bewertet in Großbritannien am 4. Juni 2024
Had trouble getting Windows or Linux to recognise the device. Swapped the supplied USB Mini cable for a spare I had and it worked.If you're purchasing this, I recommend getting some backup USB Mini cables in case.
KaJa
Bewertet in Deutschland am 24. September 2024
Ich habe mir den Debugger gekauft, da ich ein BMS von einem Akku resetten musste. Alles klappte auf Anhieb, die Datenschnittstelle arbeitet sauber und der Debugger ist am PC schnell eingerichtet.Die kostenlose Software befindet sich auf der Hersteller-Webside.
Brendan T.
Bewertet in Großbritannien am 21. Februar 2024
My third purchase of this Waveshare product, keeping one at the office and a couple at home, since discovering the flexibility and features of STM32 micros over PICs.Never an issue being recognised by ST's proprietary cube programmer software, used to program 'elf' images exported from Matrix Flowcode 10 Professional.
Mr Ray Lyford
Bewertet in Großbritannien am 27. April 2024
Arrived with USB C Cable. Would have been far happier if the had supplied a cable the fitted. Seller contacted me and it's now dealt with. Happy now.
Produktempfehlungen
