Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Features At A Glance
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Up to 16-Channel servo/PWM outputs, 16-bit resolution for each channel
Integrates 5V regulator, up to 3A output current, allows battery power supply from the VIN terminal
Standard servo interface, supports common used servo
Exposes unused pins of Pico, easy expansion
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
OPERATING VOLTAGE 5V (Pico) or 6~12V (VIN terminal)
SERVO VOLTAGE LEVEL 5V
LOGIC LEVEL 3.3V
CONTROL INTERFACE GPIO
MOUNTING HOLE SIZE 3.0mm
DIMENSIONS 65 × 56mm
Ninh Nguyen
Bewertet in den USA am1. Februar 2025
I gave 2 starts due to the board has no instruction. No example to show how to use it. I will figure out how it work in the near future.
Cachew
Bewertet in den USA am27. Oktober 2024
works as advertised.
Dan
Bewertet in den USA am14. Juli 2023
I have previously built something very similar to this using protoboard and an external buck converter. This board from Waveshare is _sooo_ much cleaner and easier than doing it yourself. Unlike many other PWM controllers, the board itself does not provide any of the electronics for the PWM. Rather it just conveniently exposes the pins of the Raspberry Pi Pico in a way that makes it easy to hook up 16 servos and leverages the built-in PWM functionality of the Pico. I love that this board includes a voltage regulator that will convert a 6-12 volt source to the 5 volts necessary to drive the board AND the servos. In my project I have 2x18650 batteries (7.4 volt) that I plugged into the screw terminals to drive the board. The power switch and reset button are also handy additions. I also really like that the extra GPIO pins are exposed in a separate pin header so that you don't lose that functionality by plugging the pico into the PWM board.My only minor complaint is that I think that the board could probably be a little more compact if they packed the circuitry in a little tighter. It should still fit on my project, but would look a bit more tidy if it were more compact.
Mario Berutti
Bewertet in Italien am 1. Juni 2022
Il prodotto funziona bene, come da descrizione. Leggendo il termine driver ci si potrebbe aspettare elettronica dedicata, in realta' trattasi dei pin del raspberry pi pico (risoluzione pwm 16 bit) esposti e disposti ad hoc, con un alimentazione indipendente. Unica nota che ho trovato leggermente negativa e' il costo, secondo me leggermente elevato.
Produktempfehlungen
