Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Thermal Grizzly Minus Pad Advance
Leistungsstarke Wärmeleitpads für vielseitige Anwendungen
Die elektrisch nichtleitenden Minus Pad Advanced Wärmeleitpads basieren auf dem Minus Pad 8 und wurden für bessere Wärmeleitfähigkeit und Kompressibilität optimiert. Sie eignen sich für SSDs, Grafikkartenkühler, GPU-Wasserkühler sowie elektronische Bauteile wie Spannungswandler und RAM.
Sehr gute Eigenschaften für optimale Leistung
Die Wärmeleitpads bieten eine sehr gute Wärmeleitfähigkeit und hohe Kompressibilität. Sie sind einfach in der Anwendung und dank ihrer elektrischen Nichtleitfähigkeit besonders sicher für elektronische Bauteile.
Erhältlich in verschiedenen Größen und Stärken
Erhältlich sind sie jeweils in den Größen 100 × 100 mm und 120 × 20 mm sowie in Dicken von 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm und 3,0 mm. Passend für die jeweiligen Anforderungen.
jeff
Bewertet in den USA am4. Mai 2025
Huge thermal pads for large projects or several applications. The Advanced pads are thicker and heavier than the Pro but you seem to get much more for the price. I've used both on my AIO water cooler on a 13th gen i9. Both were less messy and easier to install than the liquid thermal paste. The uniformed barrier made temps 4-5 degrees cooler as well. I highly recommend going with thermal pads over paste, especially with Intel chips that seem to always pick up excess paste when you reapply. These pads also last longer and don't need to be reapplied every year or so. Highly recommend these for the convenience, performance and value.
Element22
Bewertet in den USA am31. Mai 2025
It was time to replace the thermal interface materials on my RTX 4080 and who better to use than Thermal Grizzly. I had to order various sizes to accommodate the different components. They come in strips and sheets. The sheets are easy to work with as long as long as you use a very sharp (and preferably new) blade like a hobby knife.Once all was said and done, I saw anywhere between a 10C-18C drop in thermals across the various components. Do keep in mind that the previous TIM was old and worn out so your mileage may vary. The pads were replaced about 2.5 months ago and temps are still holding steady as when they were first installed. Not having touched my fan curves on the GPU means the temps are now on the lower RPM range so my rig isn't screaming (as loud) at me when gaming.While these are on the pricier side compared to other pads on the market, they do perform exceptionally well. DeBauer and company have really put in a good amount of work to find the right formula to get heat dissipation to very effective levels.
J R
Bewertet in den USA am3. Juni 2025
Look, if you want your SSDs, GPUs, and other gear to run cooler and last longer, these Thermal Grizzly Minus Pads are a no brainer. I've slapped them on a hot NVMe drive and my graphics card, and the temperature drops were instant and impressive. They squish down perfectly to fill any gaps, which is key for good contact, and you don't have to worry about electrical shorts since they're non-conductive. Seriously versatile and highly effective. Overall pretty satisfied!
Filtered
Bewertet in den USA am23. Mai 2025
This thermal pad definitely comes in clutch that my laptop really need a 2.0mm thickness pad.Normally, the size would range around 1.0mm to 1.5mm at most for the most parts.The pads seems to perform well, although I think the price is a bit on higher side. It's only better marginally compared to the stock thermal pads that the price wouldn't really justified. You should go with the cheaper thermal pads if you are tight on budget. But if you want the absolute best where the budget is not a concerned. You may not need to look no further.
Neptune
Bewertet in den USA am17. März 2025
Thermal Grizzly is owned by Thermal Grizzly Holding GmbH, a German company founded by Eike Salow and Roman "der8auer" Hartung, a mechatronics engineer and known figure in the overclocking community"This is hands down my most trsuted computer parts company in the modern day, it' run by actual community enthusiast, and people who go out of their way to make the absolute best parts money can buy. Is Thermal grizzly expensive? Yes.. but when you really think about it they are not. When you've wasted money like I have on Thermal paste and thermal pads you begin to realize that TG is usually only a few dollars more and I've never not one time had a single issue out of TG since I started buying their products.The Minus "Basic" and "Advanced" thermal pads..Cards serviced and tested with these pads at one time: Asus strix 1070Ti / EVGA FTW 1080 / EVGA FTW 1080Ti (2 customer cards and one personal card)This is far from the first time I've used these pads, i've been using these for cutomer cards and peronsla cards since they came out, and I would usggest them over any OEM pad period. They have stayed consistent over the years and I've never received a bad batch like I have with other companies, to the point I don't even waste my time with anything lowe than TG. I usually see a 5-7F in temps fromthese ads over OEM.The advanced pads are exactly better in temps, they more so seem to last longer and be overall stringer that the basic pads, hoever they are harder to cut but easier to work with.Another positive towards these pads noth the basic and advance is how easy they are to work with, i don't know what kind of magic they are using but I've always found them to be very easy to work with as they don't tend to walk away from their postion as much as the other pads.Don't waste your time or oney, and take the guess work out of buying thermal pads and solutions. I've been buying from this company since 2015, and I've never had to return anything or gothrough days of emails back and forth. This is a company owned by people like us who do this as a hobby or prefessionally and when time is money, and mistakes can cost you both i got with Thermal Grizzly anytime I can.
Produktempfehlungen
34.99€
15 .99 € 15.99€
20.78€
8 .99 € 8.99€