Ihr Warenkorb ist leer
Ihr Warenkorb ist leerKREMORV Fahrradhalterung für die Vorderseite des Fahrradcomputers, Kombihalterung für Wahoo Elemnt. Die Fahrradcomputer-Kombihalterung ist aus Aluminiumlegierung gefertigt. Kompatibel mit Wahoo Elemnt, Wahoo Elemnt Bolt, Wahoo Elemnt Mini, Wahoo Elemnt Roam.
SvK
Bewertet in Deutschland am 22. Februar 2025
Gute, stabile Halterung für meinen Wahoo Roam. Installation einfach, Stabilität top.
mBorbo78
Bewertet in Deutschland am 21. Januar 2025
The screws are so tight and low quality that it is impossible to remove them. I needed to remove the camera/light adaptor but it is impossible: the screws ended up to be ruined by the microscopic wrench (not included) necessary to make them rotate (but they are too tight and it is impossible to make enough lever to rotate them without damaging the screw).I will request a refund.
Carsten B.
Bewertet in Deutschland am 18. Februar 2025
Unterteil lässt sich nicht abschrauben, die Schrauben waren viel zu fest angezogen. Die Aufnahme von dem Imbusschlüssel sofort rundgelutscht, schade. Besser wäre es, wenn man das Unterteil selber dranschrauben könnte, würde Ärger ersparen.
abooo
Bewertet in Deutschland am 5. November 2024
keine Innenaufnahme für die Mutter des GoPro-Mounts. Daher etwas umständlicher beim Anziehen und optisch weniger "sauber", aber kein Beinbruch.
Giova65
Bewertet in Italien am 30. Juni 2024
Tutto come promesso.
mimo
Bewertet in Deutschland am 27. Dezember 2024
Die Halterung besteht aus Aluminium und wirkt sehr hochwertig. Sie ist nicht instabil, sondern sehr stabil; beim Anbringen gab es keine Probleme. Man braucht also keine Angst zu haben, dass etwas abbricht, wenn man sie normal festzieht. Mein Wahoo ELEMNT Bolt V2 passt perfekt, nichts wackelt, und bei Bedarf kann man unten sogar eine GoPro montieren. Für den Preis habe ich absolut nichts zu bemängeln.
Chard Reviews
Bewertet in den USA am27. Februar 2024
This is a solid generic design to get your bike computer and or lights out front, and clean up your handle bar. It is made of all aluminum light weight material, other than the plastic locking section. I say generic design since i see a few other sellers with the exact same design just re-branded. This is priced a dollar or two more, so shop around for a "better" deal. Overall, this design is solid and holds my light and computer with no issue. Install is pretty easy with removing two bolts from the stem and reinstalling using the provided bolt and spacer. The one comment I do have about the overall package is possibly including color matched bolts or bolts with a better finish. The two bolts securing the mount to the stem are not aesthetically pleasing but it works.
michael-23
Bewertet in Deutschland am 23. Dezember 2024
Hält gut, sauber verarbeitet und passt auf meinen Scott Gravel Lenker mit dem Wahoo Elmnt Roam 2.
Mrs K
Bewertet in Großbritannien am 20. Oktober 2024
Pros:- Nice light machined aluminium mount- Ability to fit a go pro camera/light underneath your bike computer- No risk of bike computer falling off and mount doesn't flexCons:- NoneI hope you find this review helpful.
Boomer Cycles
Bewertet in den USA am19. Juli 2024
Update: I liked this so much that I bought a second one for my other bike. While I’m just as happy with the 2nd as the 1st, the 2nd package was short one bolt; it had 3 instead of four as it was missing 1 short clamp bolt.- original review -I bought this to open up space on my handle bars which have flat tops and not much real estate for the stock Wahoo bar mount. Set up was pretty straight forward once I realized that I needed to use the spacers on the bottom (not top) bolts of the stem clamp. Nice tight fit on my Wahoo Elemnt Bolt. Has withstood several test rides including several metric centuries+ including gravel grinders that shook, rattled & rolled. Sturdy construction and materials. Great value for money. Have not yet tried attachments but will revise this review once I do.
Customer Review
Bewertet in Großbritannien am 16. November 2024
I use this mount on my gravel bike to hold my bike computer and a front light which uses the gopro type mounting. It's pretty easy to fit although requires undoing your stem faceplate screws and so far in use has proved to be robust and solid, with no flexing or movement. The angle of the computer depends on the angle of your stem as there's no adjustment, but I found it gave me decent visibility of the computer screen. The unit attached to the go pro mount obviously has a lot more angular adjustment possible. The go pro mount comes with a screw which requires a tool to attach, while this has the advantage of being able to get it really tight so it doesn't move with vibration it makes it less convenient than the ones that have thumb nuts. Due to the fixed position, the mount may not work with a bar bag depending on its design, it sat too low for instance to use with my Straight Cut bagel bag.The computer mount itself is plastic, everything else is metal, but that's fairly standard and helps protect the mounting tabs on the device itself in the event of a crash. It all feels fairly well machined with no rough or sharp edges, and comes with all the necessary bolts.Overall I'm pleased with it and have used it for numerous rides without anything coming loose.
Produktempfehlungen
