Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Introduction:
In the educational market, micro:bit control boards are becoming more and more popular.
However, a single micro:bit control board is not easy to test with other sensor modules.
We particularly design this keyestudio sensor expansion board V2 for micro:bit.
The sensor shield V2 breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), very easy to connect the micro:bit control board and other sensor modules.
Moreover, it also extends some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.
So that this shield will allow communication between micro:bit control board and other communication devices.
You can power the micro:bit board through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield.
When power the sensor, you could select the supply voltage 3.3V or 5V via jumper cap V1 and V2.
Technical Details:
Power input: black DC jack (DC 7-9V) or micro USB port (DC 5V).
Voltage output: select 3.3V or 5V via jumper cap V1/V2 Comes with a power indicator.
Extends the PIO of micro:bit into 3PIN interface
Serial communication pin
I2C communication pin
SPI communication pin
Dimensions: 65mm x58mm x12mm
Weight: 31g
Example Use
Send the code to your micro:bit board, and insert it into the sensor shield.
Then set the V1 and V2 to 5V output, power it via DC jack (DC7-9V).
Connect the LM35 sensor and 12C 1602 LCD to the sensor shield using jumper wires.
Finally display the current temperature value on the LCD.
You could refer to an example picture above.
Package Lis
KEYESTUDIO Sensor Shield V2 for BBC micro:bit * 1
Ferdinand
Bewertet in den USA am2. Februar 2025
Funciona perfecto para la microbit
Georgios
Bewertet in Deutschland am 8. August 2024
kddf
Mr. S. A. V. Willmott
Bewertet in Großbritannien am 30. Oktober 2024
Bought 4 as these are excellent for building projects with a Microbit
Jesus Diaz
Bewertet in Spanien am 25. Februar 2024
la relacion calidad/precio/rapidez de entrega es fenomenal, es para comprar junto con la tarjeta Micro:bit. se pueden programar cosas muy chulas, lo recomiendo.
Heinz Wrosch
Bewertet in Deutschland am 11. November 2024
Der Adapter funktioniert einwandfrei und macht die kleine Computerplatine deutlich einfacher zu handhaben.
Knutsel
Überprüft in Belgien am 10. August 2024
Dat is nu eens een goed afgewerkt product, fijn om te hebben en om mee te werken.
Andre
Bewertet in den Niederlanden am 30. April 2024
zoals verwacht.bedankt voor de snelle service hiervan zo kan ik weer verder met experimenteren.greets from Belgium
Erik Haak
Bewertet in Deutschland am 12. März 2023
Wir machen Technik Unterricht im Gymnasium mit Micro:Bits. Und diesen Breakout Adapter ist einfach toll zum verbinden mit allerhande Elektronik. Auch super dass die Spannungsversorgung gut und bequem vorhanden ist.
Produktempfehlungen
