Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare A7670E LTE Cat-1 HAT for Raspberry Pi Enabling LTE Cat-1 / 2G Communication & LBS Positioning Multi Band Support 2G GSM/GPRS

Kostenloser Versand ab 25.99€

38.99€

17 .99 17.99€

Auf Lager

Info zu diesem Artikel

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL.
  • Supports dial-up, telephone call, SMS. Supports LBS base station positioning, it is able to get the approximate position info via mobile network.
  • TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words. Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
  • Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. 2x LED indicators, easy to monitor the operating status.
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).


The A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate.
It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series.
It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on.

User Manual

www.waveshare.com/wiki/A7670E_Cat-1_HAT?amazon


Gibus
Bewertet in Frankreich am 10. Mai 2025
La qualité est bonne, ainsi que la sensibilité radio. La mise en oeuvre matérielle est assez simple. On pourra démarrer la carte avec la broche PWR et l'arrêter avec la commande "AT+CPOF". On peut voir si le module est démarré en testant la broche 1V8. Avec mon Arduino j'ai descendu la vitesse à 9600 pour un fonctionnement fiable. Côté logiciel, pas de bibliothèque dédiée qui faciliterait le travail, il faut utiliser les commandes AT pour arriver à ses fins. Ce peut être très (trop) long pour arriver à ses fins avec un processus fiable. En cas de soucis le support Waveshare répond présent.
Produktempfehlungen

219.90€

99 .00 99.00€

4.9
Option wählen

50.94€

26 .99 26.99€

4.5
Option wählen

30.39€

13 .99 13.99€

4.9
Option wählen