Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Technische Daten：
Material: Aluminiumlegierung
Dimension: 135 x 56 x 33 mm (5,3” x 2,2” x 1,3”)
Gewicht: 230 g
Kompatibel: 3 mm bis 35 mm
Paketinhalt:
1 * Rohrschneider
3 * Ersatz Schneidrad
Rolli
Bewertet in Deutschland am 24. November 2024
funktioniert dauert ein wenig man muss langsam drehen / schneiden
MONICA Z.
Bewertet in Deutschland am 22. August 2024
I was skeptical about a 10 EUR "no NAME" tool but I gave it a try before spending ten times more. I just needed it to cut five times a VERY hard stainless steel handrail, 34 mm outer diameter, 2.5 m thickness or perhaps 3 mm. This is a tough job of pipe cutting.It worked like a charm, see photos. It is extremely small (barely fits in the palm of the hand) which allows it to be used with little clearance where bigger models wouldn't fit. The body is made of some alloy, aluminum perhaps, it feels robust and heavy. It came with 3 spare cutting wheels plus one installed, total 4.First wheel allowed me to cut nice and clean two inox handrails "and a half". I litterally used the wheel to destruction before changing it because I didn't know if it was easy to exchange it (it was, after you figure out how to take out a small ring pin with pliers). Exchanging the wheel did the rest until five cuts.Whoever expects the cutting wheels to last forever for such strength of inox pipe, is simply wrong. Cutting wheels are a consumable. I assume that for copper, aluminium or plastic pipes, a cutting wheel lasts forever, but at that price, who is counting? Even at two inox tube cuts per wheel it comes at 1EUR per cut if you buy replacements. For cutting copper probably 20 or 30 pipes.Applying maximum pressure, each inox tube was cut in about 20 full turns. Cuts are EXTREMELY clean despite the VERY strong and hard pipe, see photos. The secret is, keep the pressure very high, and increase it again at every turn. You must force the cutting wheel into the tube surface for this gadget to work. Once you hincorrectly. it follows the groove incredibly accurately. For the first cut I was not putting enough pressure so it made a few "thread like" hairline marks, but there is nothing wrong with the tool, I was using it incorrectly. See middle photo.For a thinner pipe or a softer material maybe 5 to 10 turns are enough to cut, but I would go easier on the pressure to not deform the pipe.Once the cutting wheel is gone, then it is gone. Change it, you have 4 at the same 10 EUR. Or you can buy 10 more for 10 EUR.Tool includes a deburring knife and it works too. Although the cuts were so clean that there was not much to debur.I assume a pro will prefer spending 100 EUR in a good name tool, but for an occasional usage this tool is just perfect at the price.
Justus Lühring
Bewertet in Deutschland am 20. November 2024
Sehr scharf, gut einzustellen, und somit geht zb. Die Kürzung eines Rohres oder Fahrrad Lenker ganz leicht. Tolles Ding 👍👍
Gerhard Schumm
Bewertet in Deutschland am 18. März 2024
Ersatz für meinen verschlamperten Profi-Rohrschneider, weil ich solche Werkzeuge nict mehr so oft brauche. Schon einige Male mit Kupferrohren getestet, funktioniert einwandfrei und macht auch einen stabilen Eindruck. Dazu drei Ersatzrädchen geliefert - unschlagbar günstig.
montes
Bewertet in Deutschland am 17. September 2024
Der Abschneider war einfach zu bedienen und das Abschneiden war schnell ausgeführt
ManSim
Bewertet in Deutschland am 11. August 2024
für gelegentliche anwendungen ok
Zapletal Johann
Bewertet in Deutschland am 1. November 2024
Passend
Ales is oké
Überprüft in Belgien am 14. September 2023
Luik
Giuseppe
Bewertet in Italien am 31. Juli 2022
Ero scettico, invece … prodotto di buona qualità. Costa poco e fa alla grande il suo dovere. Ho tagliato tubi per la tenda in maniera perfetta e precisa. Facilissimo da usare e funziona da Dio 5 stelle per me
jc
Überprüft in Belgien am 28. November 2022
le plastique du coupe tube etait ouvert il manquais deux roues de rechange
JICE
Bewertet in Frankreich am 27. September 2022
Cet outil a coupé facilement 20 tubes de 28 en cuivre.
guillermo g.
Bewertet in Spanien am 25. September 2022
Sólo viene una cuchilla repuestos
björn
Bewertet in Deutschland am 19. Mai 2022
Sofort einsatzfähig und leicht zu bedienen.Leider fehlte in der Verpackung die dritte schneidescheibe. Ansonsten alles wie beschrieben.
Produktempfehlungen
