Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Dies ist ein agiles Raupenfahrwerk, geräuscharm und einfach zu steuern, könnte ein guter Partner für Ihre panzerähnlichen Roboter sein.
Feature:
-Einfache mechanische Struktur und einfache Installation.
-Intelligente Roboterautos mit Hochgeschwindigkeitsmotoren eignen sich sehr gut für Heimwerker.
- Verwendung für pädagogisches Lernen, Wettbewerbe mit intelligenten Roboterautos und Unterhaltung.
- Roboter-Chassis-Kit aus starkem Aluminiumlegierungsmaterial, Größe: 300 * 230 * 124 mm (L * B * H) / 11,81 * 9,06 * 4,89 Zoll.
- Kann mit anderen Geräten verwendet werden, um die Funktion der Verfolgung, Hindernisvermeidung, Entfernungsprüfung, Geschwindigkeitsprüfung und drahtlosen Fernbedienung zu realisieren.
Einfach zu kontrollieren
Dies ist ein agiles Raupenfahrwerk, geräuscharm und leicht zu kontrollieren, Sie können problemlos auf dem Rasen fahren
Schneller bewegen
Das hochwertige Raupendesign kann das Produkt schnell an jeden Ort bringen. Es kann für intelligente Roboterautowettbewerbe und Unterhaltung verwendet werden.
30° Hangklettern
Mit dem Crawler-Design kann es leicht Steigungen von etwa 30 ° überwinden und auf dem Sand laufen.
Motorparameter:
Typ: GM25-370
Ausgaberate: 150 + 10 % für RPM
Nennspannung: 12V
Nennstrom: 2000mA
Strom bei blockiertem Rotor: 4500 mA (max.)
KgNaN Drehmoment bei blockiertem Rotor: 9,5 kgNaN
Ladegeschwindigkeit: 100 + 10 % U/min
Das Lastmoment: 3000 gNaN
SPEZIFIKATIONEN:
Marke: XiaoR Geek
Produktgröße: 300 * 230 * 124 mm
Farbe: SCHWARZ/BLAU/GOLD
Material: Aluminiumlegierung
Arbeitsspannung: 7-15V
Handwerksprozess: Galvanisieren
Motordrehzahl: 160 U/min
Gewicht: 1,2 kg
Paket beinhaltet:
- 1 * Schraubenschlüssel
- 1 x Schraubendreher
- 2 x Motor
- 2 x Spur
- 2 x Antriebsrad
- 10 x Angetriebenes Rad
- 1 x Anleitung
- 1 Set Base und 1 Set Screw Zubehör
TC
Bewertet in Deutschland am 19. Oktober 2024
Das Fahrwerk ist billigst produziert worden. Mir fehlen unter anderem Einsenkungen für Schraubenköpfe, diesen Produktionsschritt hätte man durchaus noch mitmachen können. Laufrollen haben viel Spiel. Chinesischer Grußaufdruck auf den Laufrollen. Die Kette hat auf glatten Oberflächen einen sehr niedrigen Grip. Erhöhe grade systematisch das Konstruktionsgewicht, damit das keine Rutschpartie später wird. Für den Preis finde ich das schlechte Qualität.
Grace Wong
Bewertet in Singapur am 1. Januar 2024
No instruction, the big top piece, two types, a few more items were not there. It is very disappointed as it was a Xmas gift for my child.
entropie
Bewertet in Deutschland am 3. Juli 2023
Great, robust and still lightweight kit. Lots of mounting holes and I built a custom robot with it. I drive both engines at full 12 Volts and they have lots of speed and torque.
datamon64
Bewertet in Italien am 28. August 2023
Il GEEK Robot Smart Car Chassis arriva smontato con istruzioni piuttosto scarne.Si capisce molto bene come assemblare le ruote, un po' meno bene come costruire le ruote dentate che trascinano i cingoli, poi per l'assemblaggio del resto dello chassis occorre andare a vedere le foto su web, ma non è un grosso problema, i pezzi sono pochi e si fa in fretta a chiudere tutto.Vorrei dare qualche raccomandazione.Conviene lubrificare il mozzo delle ruote. Non ho capito se ci sono dei cuscinetti, comunque quando si serrano le viti le ruote girano poco. Ho dato un goccio (ma proprio un goccio) di WD40 e poi le ruote giravano benissimo. Non va ovviamente dato sulle ruote dentate.Per quanto riguarda le ruote dentate, su una si mettono i distanziatori in ottone e l'altra ruota dentata va bloccata sui distanziatori: ci sono tre posizioni relative tra le ruote dentate e una sola è quella su cui si allineano i denti, sebbene apparentemente tutte e tre le posizioni potrebbero sembrare equivalenti. Occorre fare attenzione, altrimenti le due dentature della ruota restano sfasate e non prendono bene il cingolo che dunque gira male e il tank non è controllabile.Infine, relativamente alle ruote non dentate, quella in alto va serrata per ultima, dopo aver montato il cingolo e controllato che le ruote dentate lo trascinano bene.Per il resto, il tank offre tanto spazio e tanti buchi per montarci sopra qualsiasi cosa.Nel complesso raccomandato.
Andrew
Bewertet in Großbritannien am 22. Juni 2023
Sturdy base, but had an issue with the tracks at first. Customer service were very helpful and polite. Was able to get the issue sorted quickly and it drives like a charm.
Artem S.
Bewertet in Deutschland am 21. Juni 2023
Pros:1. Works2. High bottom profileCons:0. Motors outputs are different! 350 RPM declared, but actually one outputs ~330 RPM and other ~360 RPM (measured using laser tachometer with both Pololu driver and direct 3x 18650 connection)1. Ultra low-quality single-use screws. Screw drives are made of very soft metal. Some screws are even not straight (see the image)!2. Low-quality wheels. Every wheel has different friction level, one of them almost isn't rolling.3. Some assembly operations should be reversed for better access to the other parts while assembling.Summary: the idea itself is good, but the implementation is very poor. I've expected better quality for €99.
alexander wampel
Bewertet in Deutschland am 12. Mai 2022
Die Medien konnten nicht geladen werden.
Customer
Bewertet in Deutschland am 22. Februar 2021
- The kit is simple, the quality of metal parts is good, as in, no alignment issues for me. Anodization is impressive.- The kit contains spare parts. (screws, nuts, track pieces)- The motor shaft fastening method (screw interference on key) to the driver wheel felt a bit funky with the screw sticking out.- The instructions could be better but they got the job done. Mistakes I did were not first aligning the driver wheel to the driven wheels (so the track would be running diagonal, not good), and fastening completely the driven wheels before putting on the track (it is easier to put on if one wheel is a bit loose). The kit took about an hour to build and test.At 8V (I plan to use a 2s lipo) the noload (spinning on air) current with track installed was 0.3A. When the motor was stalled(motor movement blocked), it drew about 2.2A. After 10 seconds of stalling, it was still cool. The torque felt sufficient.
Justin S.
Bewertet in den USA am19. April 2021
Everything went together fairly well and the motors worked. They included spare screws and nuts, and that's really appreciated. I did lose one of the screws that hold on one of the sprocket wheels, but since I had an extra I was saved! I suggest anyone building this use some blue(medium) locktight on those screws.Some very minor complaints:* Wires on the motors are super thin. Like, 26awg? They do work and haven't melted yet.* Motor wires were the same color. There is a small marking on each motor so I was able to figure it out.* The wrench/screw driver were low-quality, but that's fine - they were "free"* They didn't include a tool for the small bolts.* I needed to bend a few of the metal parts to make it all fit.Some notes on my project:- Raspberry Pi Zero W- L298N Motor Drive Controller- 12v lipo battery pack
Audio Joe
Bewertet in den USA am27. November 2018
In Summary: This tank chassis is very high quality, easy to build with included tools, and very versatile!The product comes shipped very well, parts are compartmentalized in solid packing foam. All metal frame parts protected by plastic bags or wrap, so they are in pristine condition. Using the online instruction PDF provided in the product description, the pictures and diagrams are very easy to follow, and are entirely in English. Assembly takes about 75-90 minutes at a comfortable pace.After assembly, some brief tests with my bench power supply provide a no-load current at 10 volts of around 600ma, and a stall current of only around 1 amp (per motor). These feel like they have a lot of torque and pulling power! As note, I have the top tensioner wheel a lot lower than in the assembly diagram, so your results may differ. All of the carrier wheels are on sealed bearings for low rolling resistance and long product life. When finished, there are many extra nuts and bolts that can be used to mount your accessories or sensors, or can be kept as spares. The chassis also provides many mounting holes with great flexibility for adding micro-controllers, sensors, servos, speed-controllers, and accessories.This is a high quality unit, I am looking forward to designing many future projects with this highly versatile platform!
Produktempfehlungen
10.39€
4 .99 € 4.99€
44.94€
23 .99 € 23.99€