Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare ESP32-S3 1.85inch Round Touch Display Development Board,360×360 Pixels 262K Color LCD Display with ESP32-S3,Supports WiFi & Bluetooth,32-bit LX7 Dual-core Processor

Kostenloser Versand ab 25.99€

44.15€

21 .99 21.99€

Auf Lager
  • 【ESP32-S3 1.85″ LCD Development Board】Integrates QSPI interface display, multiple peripheral interfaces
  • 【IPS Display Panel】262K color, 360×360 resolution, wide viewing angle
  • 【Supports multiple peripherals】Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc.
  • 【Display control chip】Display: ST77916
  • 【Capacitive touch】Optional for capacitive touch function controled via I2C interface for flexible operation and smooth UI interaction, with interrupt support


ESP32-S3 1.85inch Round Display Development Board, 360×360, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth,
Accelerometer And Gyroscope Sensor, ESP32 With Display, Optional for Touch Function
Features
ESP32-S3-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM.
Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL, optional for capacitive touch function. Combined with various peripheral
interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
Onboard 1.85inch LCD display, 360×360 resolution, 262K color
Optional for capacitive touch function controled via I2C interface, with interrupt support
Adapting UART, I2C and some IO interfaces
Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Development Resources
https://www.waveshare.com/wiki/ESP32-S3-LCD-1.85?Amazon
Package Content
ESP32-S3-LCD-1.85 x1
2030 8Ω 2W speaker ×1
SH1.0 4PIN cable ~100mm ×2


B
Bewertet in Deutschland am 18. April 2025
Gut. Würde ihn aufgrund der Funktionen und der verfügbaren Anwendungsinformationen jederzeit wieder kaufen.
F
Bewertet in Deutschland am 21. Dezember 2024
Das Waveshare ESP32S3 Touch Display Development Board bietet nahezu alles, was man sich von einem Mini-Display-Controller so erwarten könnte. Das kreisrunde Display löst mit 360x360 Pixeln auf und bietet eine tolle Helligkeit und einen guten Kontrast, sodass es sehr gut ablesbar ist. Der Touch funktioniert super und flüssig.Das PCB ist sehr aufgeräumt und bietet einige weitere Besonderheiten, die vom Hersteller auch schön aufgeschlüsselt und dokumentiert werden. Unter anderem besonders nennenswert sind die integrierte Lithium-Akku-Logik, die nicht nur den kabellosen Betrieb sondern auch das Aufladen des Akkus über USB-C ermöglicht. Ebenfalls an Board sind ein Gyro-Sensor sowie ein Audio-Anschluss, wozu sogar die beiden kleinen Lautsprecher mitgeliefert werden. Im Endeffekt ist es also nur noch nötig, ein kleines Gehäuse zu basteln, und man hat einen WLAN- und Bluetoothfähigen Controller, beispielsweise um Smart Home zu steuern und zu überwachen sowie Radio oder MP3 abzuspielen. Dazu gibt es sogar noch einen Micro-SD-Slot, welcher jedoch leider nur bis 16GB Kapazität unterstützt.Dennoch ein sehr cooles und gelungenes Set für kleine smarte Projekte mit Display, Touchsteuerung, Audioausgabe und mit WLAN und Bluetoothverbindung.
Produktempfehlungen

15.84€

7 .99 7.99€

4.9
Option wählen

43.69€

19 .99 19.99€

5.0
Option wählen

14.84€

7 .99 7.99€

4.4
Option wählen