Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Overview
This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
Operating voltage: 5V
Interface: USB/SPI/I80
Outline dimension: 218.8mm × 156.425mm × 1.15mm
Display size: 202.8mm × 139.425mm
Dot pitch: 0.169 × 0.169
Resolution: 1200 × 825
Display color: black, white
Gray scale: 2-16 (1-4 bit)
Full refresh time: Total refresh power: 0.6W(typ.)
Total standby power: 0.3W(typ.)
Viewing angle: >170°
Development Resources
Wiki : www.waveshare.com/wiki/9.7inch_e-Paper_HAT?Amazon
PACKAGE CONTENT
9.7inch e-Paper x1
e-Paper IT8951 Driver HAT x1
9.7inch e-Paper Adapter x1
33PIN FFC (same side contact) x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
USB type A plug to micro B plug cable x1
Dennis
Bewertet in Deutschland am 2. Dezember 2024
Das E-Ink-Display ist aufgrund des Driver-Boards mit vielen Pins etwas schwierig in ein kompaktes Gehäuse zu integrieren. Auch die Software erfordert etwas Einarbeitung. Dennoch überzeugt das Display mit ausgezeichneter Bildqualität und ist eine hervorragende Wahl für anspruchsvolle Projekte.
Bruce Lindbloom
Bewertet in den USA am17. November 2020
I built a black and white digital picture frame using this display, and it is absolutely gorgeous.I connected it to a Raspberry Pi Zero W, a Waveshare 8-button unit (for controlling the functionality) and a position switch (to determine whether the frame is hanging in landscape or portrait mode). It displays a new photo every day. I ran +5V through the wall, coming out behind the frame.The high-resolution display has 16 gray levels, and with proper dithering the image looks fully continuous tone and very much like an actual black and white photo on printed on photographic paper. (Disclosure note: I am a retired color scientist with lots of experience in digital imaging, C++ programming and Raspberry Pi, so I did lots of customization.)I would recommend this product. There is nothing like it on the market that I know of.
Produktempfehlungen
