Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung des Herstellers
VEVOR Lattenheber – Schweres Heben, weniger Stress
Der Palettenbrecher ist mit zwei 102-mm-Rädern an der Unterseite ausgestattet, die die Einstellung des perfekten Winkels erleichtern, sodass Sie Holzböden schnell und einfach aufbrechen können.
Der Palettenbrecher hat eine zusätzliche Funktion zum Herausziehen von Nägeln an der Rückseite. Sollten Sie bei der Demontage auf Nägel stoßen, brauchen Sie das Werkzeug nicht zu wechseln.
Mit dem verlängerten 152,4-cm-Griff unserer Abbruchstange können Sie die Kraft der Stange mühelos nutzen und brauchen sich nicht übermäßig zu bücken.
Unser Lattenheber bewältigt mühelos das Entfernen von Holzböden und Nägeln, und hilft Ihnen, Ihre Renovierungsprojekte schneller abzuschließen.
Omdeezy
Bewertet in den USA am1. Februar 2024
I got this to dismantle pallets as my wife wants me to help her with some simple pallet projects. I have in the past tried dismantling them using a hammer and small pry tool. That is a lot of work and is bad on my back and knees as I bend over and on my knees sometimes.This tool changed all that. Now dismantling a pallet is much easier.In terms of quality of the tool, it is made of hefty thick material. As you can see in photos the welds are generous. All this means the tool should be able easily handle the stresses and last for very long time. On that front it also appears to be finished nicely with powder coated paint to prevent rusting.It is generously long - 50" from the pivot point to the end of the handle after assembly. This length provides plenty of leverage making the job easier with much less effort.I also like that top of the handle has a rubber sleeve that provides a soft grip. Also included are a pair of gloves for protecting hands - a very thoughtful idea. I also find that the tool was very well packaged with adequate cushioning and a sturdy cardboard box - again goes to show attention to delivering quality.Overall very happy with the tool and happy to recommend it.
TeaForecast
Bewertet in den USA am6. November 2023
I like the fully integrated design of this tool vs the "add your own pipe" variety. It is plasma cut plate and tubing arranged into a clever, effective tool. It breaks down into two pieces with a reinforcing sleeve and reasonably heavy screw stud connector providing a nice straight fit. One critical note is the curvature on top of the "ducks bill" may be a little excessive for broadest utility optimization. I say this because the curve as it is requires the devices vertical face, i.e. the "neck" adjacent to the duckbill, to be fully seated against the boards in order to begin levering. At times this made it a little less ergonomic, nevertheless it made five minutes out of what has been typically twenty minutes work with a reciprocating saw and hammer. The pallet I busted with the tool was not a high quality hardwood pallet, so the boards were shattered here and there. I think it could be used to gingerly remove the boards if so desired, with some technique and some luck so as to recover the lumber for projects. My primary use is for kindling wood from free pallets so I appreciate simplicity and power of the tool for that application. It do demolish pallets with alacrity. These guys are making some good tools at affordable prices. I have friends that will be impressed by it for sure.
James
Bewertet in den USA am28. Oktober 2023
In fairness, if it was possible to award 1/2 stars, this would be a 4.5 out 5. But since it's not, I have to round down to 4, because 5 stars is essentially a perfect item...near or actually flawless...which this is close to, but just shy.We get multiple skids a day at the warehouse, some better condition than others. The ones that are beat to junk, we scrap. Dismantling them by hand is awful, so I was pretty excited to see this tool.Yes, it works (see my photos, I uploaded them in order, but have no way of knowing if they'll actually post in that uploaded order...).2 knocks:1) Some that we get are not "standard pallets". They're Frankensteined monstrosities that aren't always with lengths supports that are standard widths. If the claw on this tool was adjustable in width (and could go a little wider if ever needed) it'd work on pretty much 100% of the skids we come across back there. But, as it is, we can really only use this tool for the "normal" skids, which luckily comprise probably 75-80%, but that leaves the remaining 20-25% where we'll still have to do it by hand.2) Found that the connection at the handle would sometimes start to turn while using. You have to stop and tighten it back (screw it back tight). A better "locking" way that avoids such a situation would be most welcome.Feels pretty robust, nice weight to it, I don't see this breaking any time soon.Overall, still a very handy tool to have in the warehouse -- 4.5 stars in actuality.
Tyler S.
Bewertet in den USA am21. November 2023
It works good and angle is right but it bent during the first time using it.it didn't take a overly large amount of pressure before it bent.Awesome concept great design but for the price that doesn't break with standard use.
Spencer in Seattle
Bewertet in den USA am20. Oktober 2023
The only noticeable weakness with this leverage based pallet wrecker is the screw-together two part handle. That design makes for cheaper shipping but it means the handle has a connection in the middle AND is kind thin in terms of the handle's diameter.But the dang tool gets the job done. Works on leverage to get under pallet or deck boards and pop them up and out.
Produktempfehlungen