Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung des Herstellers
Verbessern Sie die Oberflächenbehandlung durch präzises Sandstrahlen
Der 18,92 L Sandstrahler von VEVOR ermöglicht die Hochdruck-Oberflächenbehandlung, das mühelose Entfernen von Rost, Farbe, Flecken und das Polieren großer Flächen sowie das perfekte Sandstrahlen von gekrümmten Oberflächen und Lücken.
Unser Sandstrahlgerät ist mit einem Öl-Wasser-Abscheider ausgestattet, der Feuchtigkeit effektiv filtert, um das Strahlmittel trocken zu halten, wodurch verhindert wird, dass nasse Medien das Ventil verstopfen, und ein reibungsloses Sandstrahlen gewährleistet wird.
Sie erhalten eine flexible Sandstrahlpistole aus Aluminium, die nicht nur leicht ist, sondern auch eine präzise Steuerung mit nur einer Hand ermöglicht. Im Vergleich zu herkömmlichen Spritzpistolen mit Kugelhahn aus Messing ist sie langlebiger, leichter und benutzerfreundlicher.
Unsere Keramikdüsen sind verschleißfest, hitzebeständig und verformungsbeständig und verhindern so Schleifverstopfungen durch Düsenverformung. Diese Keramikdüsen sind in 4 Größen erhältlich: 1/16", 1/12", 1/10", 1/5", und sorgen für eine stabile Sandstrahlleistung.
giuseppe arduini
Bewertet in Italien am 3. Juni 2025
il problema e che con un compressore da 100litri e 1,5hp non riesci a sabbiare funziona pochissimi secondi poi va in blocco.
Tholet
Überprüft in Belgien am 24. April 2025
Bonne machine mais pour moi j’ai commandé un trop petit réservoir, et à la livraison l’a sécheur et régulateur etait cassé mais ça c’est accause du livreur ! Sinon nikel pour petit travaux !
HFL
Bewertet in den USA am17. April 2025
This is a smaller blaster, perfect for the smaller jobs I needed it for. It is nice that it comes almost completely assembled. Only need to put the stand and axle/wheels on. Most times people will comment about horrible instructions with no pictures, no worries here. They give you plenty of wordy instructions and no pictures. Even the though the instructions references this pic and I hat pic, but there are no pics at all. When you put it together, the legs are labeled left and right, nice. But, who’s left and right. It is not left and right as you look at it, it is left and right from behind. Keep that in mind so you don’t have to yours apart like I did. The nipple that the hose for the gun attaches too is terribly undersized. I used and better hose clamp then the one that comes with it and had to put a huge amount of force to be able to compress the hose down onto the nipple. I don’t know if it is tight enough yet but I will try to find a better nipple that is flanged like an air hose nipple should be. The one that I’m on it is smooth, hose can just slide off. And the is a bunch of junk inside the blaster that I have not dumped out yet. Don’t know what it is yet. All that being said it does look like a nice sandblaster. Hopefully it is.Update; parts list shows a funnel, no funnel came with it. Also, the pressure gauge is in units I have never heard of. The instructions mentions PSI, but that is not what the gauge has. No idea what the increments are on the gauge it came with. So looks like I need to replace that.
Michael O'Neil
Bewertet in den USA am9. März 2024
First, I cannot load the images I have taken.I set this up and immediately it was apparent the manual does not coordinate well with the unit. Putting the combination cart/wheels/handle on the unit was trial and error. There actually is a right/left "leg" only discovered by trial and error.Time to clean some peeling/oxidized aluminum outdoor lights from our church.Once assembled, I loaded fresh, dry, fine media. In my case it is coal slag. I got the unit up to 90psi, opened the valve and it flowed, literally blowing everywhere but not able to actually do any work of stripping/cleaning. I got online, I read the "manual" and tried to make adjustments. Thats when everything stopped working. I had a high volume of air, like a compressor but no media. I shook the can. I added media. I opened and closed the ball valve. I changed tips. Nothing worked.Lots of advice points to clogs. So, I started taking things apart. First the home and nozzle. Clean.I opened the ball valve and nothing. I opened and closed the valve, nothing. So, I figured, its threaded stuff, lets take it apart. The manual even talks about replacing parts (at sometime in the future - not the first day). Well, that's when this became a pile of metal.kThe "brass" is so soft and it is "glued" with some type of "lock - tite" material that the valve and components are distorted, and now not replaceable. Guess what, this all must be metric because the big box stores don't have similar size or threading. Worse, a similar unit is at Harbor Freight but they don't carry the same fittings as on the VEVOR.I'm going to try and communicate with VEVOR and hope to get replacement parts. So far, this is a waste of money and several hours of my time.
john massaro jr
Bewertet in Kanada am 29. Oktober 2024
great work well
Produktempfehlungen
145.00€
58 .99 € 58.99€