Ihr Warenkorb ist leer
Ihr Warenkorb ist leerAllzweck-Schmiermittel, nass, Tri-Flow, Nettofüllung 7,1 g, Behältergröße 7,1 g, Schmiermittelbehälterstift, Mineralöl, PTFE-Primärzusatz, min. Betriebstemperatur: -60 Grad F, max. Betriebstemperatur: 475 Grad F, 50 State VOC-konform Ja, VOC-Gehalt 3,3 Prozent, Schmiermittelfarbe braun, geruchlos nein, entflammbar, extrem entzündbares Aerosol (Kategorie 1), Flammpunkt 181 Grad F, Ja, USDA-zertifiziertes biobasiertes Produkt.
David Norwood
Bewertet in den USA am17. Dezember 2024
Where has this been all these years?! Love the literal pin point accuracy for application. No fuss , no mess. Used it to lubricate fine tuners on a Floyd Rose bridge. No drips on the guitar finish.
J. T. Clayton
Bewertet in den USA am27. März 2023
Just don't beat on it, that little needle is too thin to take any abuse
John L
Bewertet in den USA am2. März 2020
Tri Flow is great....has small particles of Teflon in the oil...superior lubricant. Plus, the pinpoint applicator helps to get into very small spaces. It is a smaller quantity than I would like, but, a little goes a long way.
J. H. Smith
Bewertet in den USA am17. Oktober 2016
I have a special use for this TripFlow oil. I use it to lubricate the Variable Frequency Oscillator / Permeability Tuned Oscillator on myTen Tec amateur radio transceiver. The VFO/PTO on these radios is lubricated with grease and eventually the grease gets hard and the VFO will no longer turn making it impossible to tune the transceiver. A little denatured alcohol dissolves the grease and the ball bearing can then be lubricated with this Tri-Flow oil. It is the perfect fix for the Ten Tec VFO/PTO. The Tri-Flow is a compound of oil and teflon and makes the VFO/PTO operate very slick. I am very happy with this product.
Ron
Bewertet in den USA am7. September 2013
Here's a review a mechanic friend, weekend warrior, and savvy guy in general. Before I bought Tri-flo Teflon, I queried him about best oils/lubricants. Here, for what it's worth are his thought in my hand:#1 "Slick 50", relatively thick oil for a multitude of lube problems. Better still, the oil is infused with Teflon, making this stuff ultra slippery. So even when the oil dries out, the Teflon particles are still on the job. Use One Lube for virtually anything hard to turn doorknobs, squeaky hinges, sticking window jambs and it will even keep motor bearings lubricated and spinning. It's that versatile. If you only want a single spray lubricant that can lubricate most anything,#2 "Triflow" is a great all-around lubricant and doubles as a penetrating oil. It's thin enough to penetrate into unbelievably tight places, yet thick enough to be a superior lubricant as well. Triflow may be considerably more costly than most lubes, but you get what you pay for. No doubt it's an unusually excellent and versatile lubricant. Truth be told, if need a lubricant AND a penetrating oil, then you've got to go with Triflow.#3 "WD-40" started it all. It's not the most advanced spray lube, nor the slipperiest spray, but no one denies it works when you need to lubricate. It is a decent penetrating oil and also makes a good parts cleaner. Heavier oils and grease will literally dissolve when sprayed with WD-40, and the residue can be simply wiped away with a rag or a shop towel.There you go. The three to choose from in the opinion of an experienced, trusted, and intuitive hands-on tool jockey.I use **Tri Flow** Teflon because it lubricates, penetrates, dissolves rust, dissipates grime-&-grit with use, and seems handiest to spray/apply.Read the review twice and select from these top three products which fits YOUR need the best.Ron.
Produktempfehlungen
12.99€
6 .99 € 6.99€