Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung des Herstellers
Geklemmte Gegenstände nach Belieben neigen, drehen und drehen.
Der PanaVise PV Jr. ist ein vielseitiger, vielseitig einsetzbarer Mini-Schraubstock, der sich für den Einsatz in allem eignet, von Kunst und Handwerk, über Modellbau, Elektronik und anderen kleinen Projekten. Leicht und langlebig, der Schraubstock ist um eine Schraubstockkopf-Montage konstruiert aus einem schwarzen, glasverstärkten Thermo-Verbundwerkstoff verbunden mit einer Zinkdruckguss-Unterseite durch das patentierte Kugelgelenkklemmsystem. Dieses System hält nicht nur Gegenstände innerhalb der Schraubstockkopfmontage sicher in Position, sondern ermöglicht auch das Manövrieren über drei separate Ebenen. Die komplette Mobilität mit dem Kugelgelenk-Klemmsystem ist 210 Grad Neigung, zusammen mit einem abgewinkelten Dreh- oder Pegeldrehbereich von 360 Grad. Diese Mobilität, insbesondere die große Neigung, ermöglicht es Ihnen, Gegenstände in praktisch jeder Position anzuordnen und neu anzuordnen, wodurch die Notwendigkeit, die Gesamtposition des Schraubstocks oder des Gegenstands innerhalb des Schraubstocks einzustellen.
Gerillte Backen.
Gerillte Backen eignen sich hervorragend zum Halten kleiner Gegenstände und sind aus verstärktem thermischem Verbundwerkstoff gefertigt.
Kontinuierliche Wärmetoleranz: Bis zu 177 °C.
Intermittierende Hitzetoleranz: Bis zu 204 °C.
Maulverstellknopf
Fein/grober Einstellknopf kontrolliert den Kieferdruck für filigranes Arbeiten.
Geschwindigkeitsregler Modell 239 separat erhältlich.
Patentiertes Kugelgelenk-Klemmsystem.
Das einfach zu bedienende Kugelgelenk-Klemmsystem nutzt einen Regler für die Kopfbewegung durch 3 Ebenen.
Kompatibel mit Basismontage.
Der Schraubstock ist kompatibel mit allen PanaVise Basishalterungen und vielen anderen Zubehörteilen.
Sehen Sie sich das Zubehör an.
Geschwindigkeitsregler (Modell 239)
Neopren-Kieferenpolster (Modell 204)
Teileablage Basishalterung (Modell 312)
Beschwerte Basishalterung (Modell 308).
(Zubehör oben ist im Bild gezeigt)
MC
Bewertet in Singapur am 5. Januar 2025
Versatile use in part a kit
Alex
Bewertet in Deutschland am 22. Februar 2024
Functional for holding PCBs while working on them, in addition to “helping hands”, for which it is not a replacement but rather a complementing tool. I was a bit disappointed with the plastic jaws at first, but they seem sturdy enough (at least they are non-conducting). The best feature – sits stably on the table and doesn’t go anywhere once placed. Holes for permanent installation are present, but if your electronics lab needs to go into storage after use (temporary setup on the kitchen table, for example), the stability without any fastening gives this vice a whole new dimension. Would buy again, would recommend.
Marc Robert
Bewertet in Kanada am 9. November 2023
I screw it on a heavier base. Works great!
Norm De Plume
Bewertet in den USA am30. Juni 2023
I got this and a pair of the Model 301 vises to facilitate working on a model ship I'm starting on. I read the few negative reviews at Amazon on both models but went ahead with the purchase because I prefer to buy American on those extremely rare instances where it's possible.Bam! Score! Both models are exquisitely well made and functional. They do exactly what I need for them to do and I couldn't be happier. Excellent quality.One "feature" I needed was the option to mount these to a board I could move around my worktable. Most other options were the kind that c-clamped to a tabletop. Those would not work for me. That narrowed down the field as well. I need to clamp both ends of the keel of my 48" model ship to a fixture that will allow me to move the ship around while I work on various parts of the ship. That's what the model 301's will be used for - attached to either ends of a 1" thick MDF base.This 201 will be used to hold individual smaller parts while I'm working on them - masts, spars and the like. I'll mount this to a small board as well to provide a more solid base for the delicate work or shaping, polishing, painting, rigging etc. on small parts.Expensive compared to the off-shore models offered in great numbers at this site? Yes, they are.Worth every penny? Indeed!
Adam Alex
Bewertet in Großbritannien am 27. November 2019
Great product
Zodoz
Bewertet in den USA am19. Mai 2012
If you're working on items that generally fit in a hand: cellphones, calculators, small PCB electronics, etc., Panavise Junior will work. Unlike its bigger brother, it will unlikely tip over since hand sized objects may not be big enough to offset the vise's center of gravity. Its easy enough to screw mount it to a larger flat piece of scrap wood, or as I do, zip tie it to a 5 pound barbell weight plate temporarily. As is, and without extra bulk it makes it easier to transport and use.The jaws are made of plastic, but can resist some amount of heat. However, it won't take being hit directly by a soldering iron. Its rigid enough to hold firmly, and its amazing something made so cheaply work so well. The box says its made in USA, but there are no marks to suggest the same.The vise is made to hold items, while a helping hand is more for smaller items, like holding wires on a PCB, so they complement rather than replace each other.Panavises vises hold value well; auction sites often have 30+ year old used models that fetch 50%+ the cost of new models, or accessories. Older models are much heftier and better finished.There is one option available as of this writing, a wheel you can overlay onto the thumbscrew so you can spin the screw with your finger to get the jaws moving faster.ConsThe finish is fairly crude. Its rough and not the same quality of materials and workmanship of the original Panavise from the 1980s, but it works just as well, and thus, can be forgiven.There are no other vise accessories that fit this base, as of this writing, but the Junior head can be purchased for the standard 300 bases, but it cost as much as the whole Junior!The screw used in the vise is fairly fine, so it takes a lot of turning to get it to open completely. The $5 wheel accessory should be included with the unit, not as an accessory.Despite a lot of copying by counterfeit makers of many electronic products, this is one item I've never seen as counterfeit, so most Panavises I see are genuine, this is one of them.
Produktempfehlungen