Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Model
For Z750 2007 2008 2009
For Z1000 2007 2008 2009
Product
Condition: 100% Brand New
Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch
Package List:1 x Motorcycle Gear Indicator
Design
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Installation
Find the 4-pole male diagnostic connector(DLC), usually near the ECU box, It may have a removable cap and may be partially covered by black tape.
Set up
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
The display will blink "1". Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.
When the display shows "2", select second gear. Repeat this process until all gears are thought (5 or 6).
If some gears are not indicated correctly, please reset gear indicator. turn on the key switch of the switch lock. When the gear indicator shows 5.4.3, turn off the key switch of the switch lock immediately, and then turn on the key switch of the switch lock immediately. According to the above operation, turn on and turn off the key switch of the switch lock five times in a row to see if the reset is complete. Thank you
Notice
Please confirm whether this product is what you need before buying
If you have any questions, please communicate with me, I will handle it for you