Mikrofon Arm | Low Profile Mikrofonarm mit Gear-Lock Design für rutschfreie Stabilität – Max. 3 KG Traglast, kompatibel mit Shure SM7B & Co. – Universelle Mikrofon Halterung & Mic Boom

I like the mobility of this boom stick. It is very flexible and low resistance. Easy to move around the table and was very easy to install. Now my mic will be closer to me and will pickup less background noises.

Ich wollte mal den „neuen“ Trend der Low-Profile-Arme ausprobieren. Bei diesem hier hat mich vor allem die Aussage angesprochen, er würde nicht durchhängen. Das ist ein Problem, das einige dieser Arme haben.Bei diesem ist das bisher nicht der Fall. Der Arm selber besteht aus Metall (Aluminium, glaube ich). Die entscheidenden Gelenke sind aus Kunststoff gefertigt. Ob das eine gute Entscheidung war, muss sich noch zeigen.Der Arm lässt sich gut bewegen und braucht nicht viel Platz. Mit einem SM7B Mikrofon wird es in bestimmten Positionen etwas eng mit dem Anschluss. Da muss man ein bisschen ausprobieren.Die Kabelführung ist gut gelöst. Die Clips lassen sich leicht herausnehmen, das Kabel dann hineinlegen und die Clips dann wieder montieren.Tatsächlich hängt der Arm nicht durch. Sehr gut.Alles in Allem aber ein gutes Produkt, das ich empfehlen kann.

There are not many swing arms that can hold a heavy RODE mic without sagging. This is one of the few strong ones! I especially like the option of being able to set a monitor in front of the swing arm and how this can swing underneath the monitor. I also like the tracks that allow you to tuck in and secure the cables. Everything is quality and this earns a full five stars!

I replaced my previous mic boom arm with this Audio Accessory low profile arm. My old one was originally purchased at more than twice the price of item under review, leaving me a bit dumbfounded in comparison.This looks and feels high quality, and is easy to move and position a microphone. The base attachment that clamps to desk or table surface is quite firm with solid weight to it. Arm extensions feel well made and not cheap.The arms have cable routing slots to conceal mic cable, with cabling held in place with snap in plastic clips that won't pop out easily and keeps everything looking nice and tidy.The base-arm rotates smoothly and can be secured into one position with a turn-screw that has a knurled knob to loosen/tighten each rotating point. A nice feature of the two remaining rotating points that support the mic appear to have internal teeth to grip and lock into place when tightening the knobs, adding a sense of security that your mic won't sag or drop, and that's a nice, unexpected feature.A rotating ball mount where the mic is attached would allow for easy positioning up/down/left/right at the mic mount, rather than just up and down as provided, would have been icing on the cake, but regardless, this is readily accessible as an after market item if this is important to you.And of course, low profile allows placing under a video monitor if having your mic in front of you while looking at your monitor for zoom calls, etc is important to you. It deserves the 5 stars.

I record regularly at home and have tried several mic booms to fit my awkward work desk. I wanted to try this new gear based boom as a low profile solution to clear up my workspace. The layout and design of this device is different from what I've used. My questions and answers follow with a recommendation.Was the package delivered in good shape? Yes, it was well packed in original box with think hard foam padding.Was the packing sustainable with minimal waste? OK. Outer Amazon box not needed and was oversized for package shipped. Foam padding excessive for product protection.Was a readable manual provided? Instructions on back of box. Simple and effective. Recycle the box later.Were all parts included and in good shape? YesIs the product the same as advertised? Yes, [ ]check if dimensions given indicating the limited reach of this boom.Were any necessary tools identified and/or provided? No tools needed. Easy assembly.Were any extra parts or accessories provided? Extra mic adapter.Is the product sturdy, made well and if possible using recycled or similar parts? Yes, boom is solidly built. Gear adjustments and knobs allow for better placement. There are fewer gear adjustment settings than expected resulting in fewer options. The mechanism works well otherwise. The range of reach for the boom is less than I expected or have had with previous spring booms.Are there any visible or obvious safety concerns? No. Be sure to layout your workspace so that boom doesn't interfere or become an obstacle. I like a setup where I can swing the boom out of the way when not in use.Did product adequately perform intended functions or purpose? Yes, I would like greater extension on the base arm to fit larger desk dimensions. The grip and adjustments work well otherwise. I switched to a secondary use need with another computer for better use. I'm satisfied with the results.Does the product compare with other more expensive alternatives? Yes, this mechanism allows for larger microphones, allows for easier adjustments without tools, fits in smaller spaces with perhaps less of a footprint. The upper boom arm didn't provide as much height as I need in my main office setting but angling the mic gave me adequate results.Were photos taken? Yes, unpacking, use.Were any measurements made of performance or function? NA. I did note that no sagging occurred over time while boom installed.List other questions asked:Can the boom attachment handle tight spaces? Yes. I was able to set it up with a tight wall space behind my desk.Does cable management allow for easy removal? Yes, the clips are removable but easy to misplace. Cable routing inside the boom arm is helpful.Do I recommend the product or have concerns? Yes. Be sure to consider your workspace as this boom provided less range than the less precise type I used previously. I found several options that allowed for an adequate office setup in my situation.

This desk mount holds my Shure SM7B microphone very well. As we know this is a really heavy mic, so a lot of mic stands (especially desk mounted ones) cannot handle the weight easily. The clasp on the bottom was easy to put onto the desk and so far it's holding up. Definitely beats my free-standing Gator desk mic stand before, which took up a lot of space on my desk. Time will tell if this thing holds up or eventually starts sagging, but so far this is working as advertised.