Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDerossi
Bewertet in Italien am 19. Mai 2023
Alta qualità.
PleasantCreek
Bewertet in den USA am11. Oktober 2023
Amazon Garage says that the Mann C31002 engine air filter does not fit my 2005 Boxster S, a first generation 987 model. Amazon is WRONG! This filter is an exact replacement for the factory filter. It even has the plastic boot that fits over one end. To replace your filter is ‘difficult’, if you’ve never accessed your engine before. Several YouTube videos teach the process. If you already know how to get into the engine compartment, it is an easy job. The filter is in a black plastic housing on the driver’s side (on American driver’s side.) Remove two Phillips screws holding the housing cover, then lift cover straight up. Old filter is held by one more Phillips screw located towards front. Remove this screw. Study the filter, so you will remember how it sits in the housing. Now slide old filter towards front of car, to disengage it from the air intake. Notice that the throat of the filter fits over top of the mating air intake on the car - not inside it. Wiggle old filter out. Clean interior of housing with damp cloth. Put a tiny bit of liquid dish soap on INNER surface of the throat of the new filter to lubricate it. Guys, don’t use WD40 - it’s a solvent. Wiggle new filter into the plastic housing, with the black boot facing front of car and air intake throat facing rear. This, by the way, is a pain - just keep wiggling and it will eventually go in. Now slide the soapy lubricated throat over top the air intake flange. This can be fiddly too, just be patient. When properly seated, the screw hole on the black boot should mate up with the mounting tab. Now reinstall the Phillips screw on the mounting tab. Clean and dry your housing cover, slip it back in place (big tab goes into the mating slot), then replace the last two Phillips screws. Record your filter change in your maintenance log and crack open a cold beer. :-)
Vince
Bewertet in Deutschland am 23. Juli 2021
Wie man es bei den Filtern von MANN-FILTER gewohnt ist - da gibt es nichts dran auszusetzen.Ist ein riesen Teil, welches aber relativ fix eingebaut ist.Schneller Versand .... wie immer. Danke
Kindle Customer
Bewertet in Großbritannien am 23. Oktober 2021
Was not sure about this item, was the filter made of the same materials? I decided to weigh it and compare it to the original. I knew that if it weighed the same as the original then all the materials used in its construction were the identical to the original. I can report that they both weighed exactly 449 grams. I recommend to take your time when installing this filter, you want to point the bottom part of the filter with the black base down into the filter housing and then slowly turn the filter and move it into position. The same goes in reverse for removing the used filter, if you do it methodically its simple and quick. Great product, highly recommended.
David Laver
Bewertet in Kanada am 15. November 2021
Looks good. Haven't installed yet.
Phil
Bewertet in Frankreich am 8. September 2019
Bien repond au besoin
Customer
Bewertet in Deutschland am 2. April 2019
Gutes Produkt!
Produktempfehlungen