Easy to assemble and appears to be very sturdy.

Ich finde, dass die Box sehr gut aussieht. Ich nutze diese Box, als Paketbox. Man kann sie auch abschließen.Dass man bei einer Sorte Schrauben, die Löcher etwas größer bohren muss, finde ich nicht so praktisch.Ich würde die Box jederzeit wieder kaufen.

We tried to go the cheap route, but that thing was awful! So we got this one & it is a whole new ball game!Easy to put together with clear instructions. Super-sturdy with a great seal around all sides, bottom & lid...no rain getting in! I really like the quality of this box. I could see people using it on a boat dock, around a pool, deck, or anywhere you need storage.Even bought a 2nd one...recommended to others!Dang squirrels!...you see in the pic that we cannot store our bird feeders in here...but this really is a sturdy product. The squirrels didn't get inside but it's just a matter of time...getting a metal trashcan for the bird feeders.

I little complicated to put together; however, once done, it is a perfect size for all the pool chemicals. Nice size fits on my porch and looks great.

Grundsätzlich eine hübsche Box, aber .......... Bohrungen für Schrauben ungenau wie zu klein, Formfehler und am schlimmsten, massive Kratzer am Deckel und das bei einem neuen Produkt!!!Gibt es nur noch abkassieren und keine Qualität mehr??Ermäßigung wäre angebracht!!!

Macht im zusammengebauten Zustand einen stabilen Eindruck. Leider sind die Bilder in der Montageanleitung etwas undeutlich und die Texte nicht in deutsch.Montage ist eine Fummelei.

I really wanted to go 3 stars on this due to the terrible assembly but the box really is excellent. Assembly gets ZERO STARS and I can’t give 5 stars even though the box is great because the assembly really is THAT bad - I’m weary of 4 but I’ll do it.We have the large box that we purchased at a box store a few years ago. It was the only one left so we got the floor model and the guy told us we lucked out because it was horrible to put together. We laughed but brought the box home and it had held up very well - water tight, sturdy ... so we decided to get a smaller one for pool cleaning supplies. This actually arrived late too (forgot about that until just now) but we were eager to put it together. 10 minutes in I recalled that box store worker telling us what a nightmare assembly was. He was not lying!! Let me see if I can remember it all:1. The sides would not click and slide. We had two people trying with no luck. We finally notice one the “pegs” was smashed so with two people, one could use a screwdriver as a wedge to guide the smashed one so the rest could lock in place. Phew! Moving on, right? NO!2. EVERY SINGLE SCREW is in a nearly impossible place to reach. The screws in the tabs on the bottom ... what?!? Short screws, at an angle, not predrilled. The video doesn’t even show the man actually doing this step. I know why! The screws holding hinges on the lid are a joke to get to. If they are going to make it that complicated they should provide special tools because our ratchet would not fit. A drill/screwdriver would not fit. The head would screw with a flat screwdriver but it was VERY shallow so it kept slipping off plus you had the have screwdriver laying right on the lid to get to the screw so you couldn’t get a hand around it to help screw it in.3. The screw holes are not aligned. The metal bar in the lid - the two center screws were so off that we didn’t even know if we would be able to put a screw in ... it just about a hit a void. We took the screw at an angle and made it work but it was not easy. Also watch because due to awkward angles and unaligned “holes” or place they intend you to hit, it’s easy to pop a screw through the plastic.4. The hinges ... at this point I was about to return the box. Again, the bolts were short and the holes too small. By this time we’d already busted out a drill bit to help us with these hole so we adjusted the holes a tad to get the bolts through only to find the head of the bolt is too big for the space. It sits RIGHT on a ledge and you have to make sure it’s sitting on a flat side of the bolt (and then punch it through because you can’t screw it) because when it raises on a ‘point‘ of the hexagon head, the bolt goes in crooked. You don’t have much room here to go crooked without splitting the hole.Really, the box is great but I will not be buying another. I wouldn’t have this one if I’d had to put the first one together. It’s frustrating because I feel every issue could have been easily fixed with better design.

Bin is great. Lid fit should keep out most rain. Plastic is textured, and looks nicer than I expected.Assembly was a bit more involved than I thought. Basically you are turning screws through metal bars, where the holes are too small, maybe intentionally. So you are in effect tapping your own threads through the steel. This can require some force, and typically in a situation where there's not enough clearance to use anything but a screwdriver or crescent wrench. In a few cases the holes didn't line up as intended with the plastic parts, which required trying to force things into alignment, again implying substantial forces applied. In a few cases it was not possible to insert and self-tap the screws at the steep angles required to connect with the misaligned plastic bits. In those cases I actually resorted to using some of my own screws, which were slightly smaller and fit through the holes in the metal bars.In the end, I got it together without mishap, and the assembed product is just fine. I just recommend allowing a couple hours to unpack and assemble.