Ihr Warenkorb ist leer
Ihr Warenkorb ist leer KUNIST Für Tesla-Zubehör.
Produktname: Fron Hood Wetterstreifen
Farbe: Schwarz. Material: ABS und Gummi. Modell: Tesla Model 3 2019–2023. Funktion: vollständiger Schutz für Ihre Fronthaube von Modell 3. Lieferumfang: 1 Stück.
Chi Ho
Bewertet in den USA am21. Juli 2024
I have Model 3 from 2023. I am a little disappointed on how skimpy the weather strip is in comparison to the stock. This weather strip is so skimpy that it is not enough to block water from entering into the vent; and I tested and confirmed it. In addition, the tape is not strong enough to compensate for the discrepancy of shape between the good and the weather strip holder, so there is a small gap in certain areas between the weather strip holder and the hood. This weather strip is definitely a cheaper plastic because it covers my fingers with black smears during installing; while the stock does not do that. So, I am seriously concern about the longevity of this DIY solution.However, this weather strip does cover the entire width of hood while the stock only covered two very short portion. The stock is almost useless in stopping water from entering into the vent area.So… this weather strip probably is better than the stock in terms of coverage, but it really should have been so much better if the manufacturer made it a little thicker and use a better material.
Columbia1991
Bewertet in den USA am15. März 2024
Die Medien konnten nicht geladen werden.
andymand
Bewertet in den USA am29. Dezember 2023
I bought a similar frunk-seal kit for my wife's Model Y and it was terrific. It was easy to slide the rubber seal through the track pieces, install was easy, and as best I can tell, it's working great.This kit? It's horrible. At least the rubber seal is.I've been trying to slide that seal through the track for the last hour and I'm about 5/6 of the way done, but I just had to take a break. I had to use needlenose pliers to grip the seal (and not just at the end; I have to start at the beginning and coax it a quarter-inch at a time all along the entire length and repeat that process over and over and over) and pull it through because my fingers lost grip strength a half-hour ago.I came to read reviews to see if anyone had ideas about making this process easier. (At least I didn't try to thread the seal it after installing the tracks!) I tried a small amount of window cleaner along the path and that helped a little, but I think I might need to let that dry and try a drop of vegetable oil at various points along the path to help ease it along. Incredibly frustrating, when I had an earlier experience that was almost pleasant. (Unfortunately that vendor didn't sell a kit for the Model 3.)
EV4Life
Bewertet in den USA am19. November 2023
First I want to thank the others who posted about the poor adhesive quality.This is my install:1. Replaced all adhesives with 3M thin double sided automotive tape cutouts, including to the two surfaces on the middle section with missing tape. To avoid frustration, prying 3M red protective film with the back edge of a #15 scalpel really helps.2. Alcohol wiped area after removing old splash guards.3. Inserted the right and left tabs only by their lateral clips, medial ends hanging in the air.4. Inserted middle piece into the other two hanging by the tabs.5. Pushed right end piece middle tab in but not completely, did same on left side, then pushed them in completely once center aligned.6. Threaded the rubber edge pushing periodically in the right side to allow more to pull through, a 15-20 step process as rubber sticks. Wearing rubber gloves helps a lot also.The AC stench may be due to water constantly flowing onto the filters, as you can see this product does great shielding the air intake, photo was taken right after a car wash.
The Gaffa
Bewertet in Großbritannien am 17. November 2023
Easy to fit, Just assemble off the car including rubber remove the tape covers and click into place. Great product and should come on the vehicle. Tesla Model 3 Performance 2023
Produktempfehlungen
