Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

J-B Weld ExhaustWeld Reparaturfolie, 5,1 x 182,9 cm, Weiß

Kostenloser Versand ab 25.99€

21.73€

9 .99 9.99€

Auf Lager

1.Stil:Wrap


  • J-B Weld Auspuff: Eine hochfeste Glasfaserfolie, imprägniert mit einem speziell formulierten Harz für hochtemperaturbeständige Reparaturen. ExhaustWeld widersteht bis zu 593 °C, sobald es vollständig ausgehärtet ist
  • Aushärten und Einstellen der Zeit: Auspuff Weld kann mit oder ohne Hitze aushärten. Es härtet innerhalb von 20 Minuten aus, wenn entweder mit einer Heißluftpistole oder durch Lassen des Motors Wärme aufgebracht wird. Ohne Hitze wird ExhaustWeld in 20 Minuten einwirken und in 2 Stunden aushärten.
  • Hohe Hitzebeständigkeit: Einmal vollständig ausgehärtet, hat die J-B Weld Auspuffsystem-Reparaturfolie eine Temperaturbeständigkeit von 593 °C, sodass sie auf jedem Teil der Auspuffanlage verwendet werden kann
  • Anwendungen: Krümmer, Katalysator, Schalldämpfer, Endrohre und mehr
  • Alles, was Sie brauchen: Das Set enthält ein Paar Handschuhe und ein 1,2 x 61 cm Aluminium-Klebeband;Machen Sie es selbst: groß oder klein, Sie können es mit J-B Weld selbst gestalten. Unsere robusten Epoxid- und Klebstoffe reparieren und stellen sie beim ersten Mal wieder her. J-B Weld liefert überlegene Leistung, Qualität und Ergebnisse für die stärkste Verbindung der Welt.


NA


Lord Ian Graham-Bulldog Richards
Bewertet in Großbritannien am 21. Januar 2025
Repaired exhaust and did the job
Finstall
Bewertet in den USA am18. Dezember 2024
So what if it is a little messy...it should be so plenty of material for the cloth tape. They give a set of gloves for the hands and spread a little paper under your work and not a problem!This was my second purchase of this product for a hacked together exhaust for my portable generator to get the exhaust [ported out of the garage. Fist kit used and I let it set and it cured at Washington State ambient summer temperature. Last week there was a power failure and i finally used my get and the kit/patch held up just fine, though the aluminum tape came right off with the heat the wrap did not. But the pipe blew off in another spot so my second kit is to secure that splice.This time I used a heat gun to cure the wrap and did not bother with the aluminum tape. The wrap cured very quickly with the heat gun, it is not summer anymore so the extra heat was a good idea. Looking forward to the next power failure, I think I have it nailed! Great product J-B Weld!
Jefferson
Bewertet in Saudi-Arabien am 23. Februar 2023
only few days is just crack
QUESNEL,JESSE,LAWRENCE,BENEDICT
Bewertet in Kanada am 13. Juli 2023
Used some pipe clamps, $3.00 at Canadian tire. I recommend you do this too because it’s literally just paste and fabric and personally I don’t trust that, make sure to wire brush everything off too Before you start and wear eye protection. Was fairly easy to use and a really cheap solution. 5/5
Shane K
Bewertet in Australien am 26. November 2021
Don't waste your time and money. I did everything as per the instructions and it lasted a week before it leaked again.Very disappointed.
Produktempfehlungen

28.82€

12 .99 12.99€

4.8
Option wählen

25.89€

11 .99 11.99€

4.5
Option wählen