Printer is quite a size, had several issues with printing from mobile. Check warranty as HP said warranty wasn’t for the full year but corrected this when advised I purchased from Amazon

On my 2nd printer now, currently dealing with HP support again regarding the same issue. Works perfectly, decent quality prints etc, then suddenly won't work as needed. Constant paper jam errors, which sporadically fix themselves and crop up again and again and again. The paper is not actually "jammed" or stuck, it simply refuses to feed correctly. It either grips the paper so hard that it leaves roller marks and creases the page as soon as paper is dropped into the input tray or it just doesn't do anything at all. I spent 2 hours yesterday trying to print one page, only for it to then fail again. Just before the "paper jam" issues started I have had a few prints begin only to cancel themselves after printing a section of the print, it suddenly stopped printing, fed through the paper and then shows the paper jam error, wasting my paper in the process. There have also been times where blank paper has fed through the printer before and after printing. It's not a reliable printer in my experience.I have mostly been using this printer to print stickers, I have used pretty much the same paper throughout, it is 80gsm which is the same as standard copy paper. HP chat support said to me (and I quote) "Because when you use paper that are not compatible to the printer, at first it appears that everything is normal when the printer is printing fine but by the time the incompatible cartridge will create an error." I presume this means if you use good quality paper, anything above standard thin, cheap copy paper (although the printer has settings for high quality photo paper, brochure paper, gloss and matte etc) it will work at first and then break and that is supposed to be the users fault. So that's something to keep in mind, though as I said, the paper I have been using is 80gsm and is the same as standard paper.Chat support if you need it is awful, you message over whatsapp and a bot asks you questions (sometimes this fails and an error comes up, just type anything and send the message and it will either reset or continue) when you finally connect to a person, replies are often 20mins+ between messages. It took me over an hour for them to begin talking to me yesterday only to then say they were closing and would continue the chat today. The information and the bot states they are open 8am-8pm, the person I spoke to (yesterday and the first time I contacted say they close at 6pm on weekdays.) The first time I contacted them it took 3 days of several hours of back and forth where they sent me youtube videos of the wrong printer, requested I sent them videos of the printer not printing etc. They finally agreed to send me a replacement printer, it took about a week to arrive and they arranged someone to come and collect my old printer so that they could refurbish it. All was well, this was about 2 months ago and now I'm in the exact same situation. My chat yesterday the person I spoke to said he was keeping our chat open and to message today when I was available. I am currently waiting for a reply, it's been 30minutes so far and I have had no acknowledgement that anybody is actually on the other end.The whole thing is very, very frustrating and time consuming, often going round in circles.Other things to note; I like the ink system, I have not had an ecotank printer before but will certainly be getting one again. Easy to insert the ink and have done a lot of prints. You can see the ink levels and only seem to have made the smallest of dents in the Y ink. The printer can tell you the ink levels, but I have never had it actually tell me anything than "unknown" this was the case on both printers. It prints standard quality quickly, best quality can take a while but nothing too awful. It can be very sluggish, especially if it's had any kind of hiccup, it makes a lot of noise and you are left guessing what it's actually doing. If it wasn't for the paper feed issues I would happily use this printer, but my experience. It's a little larger than I expected, but I think that was simply the surprise of using a smarttank/ecotank printer for the first time. I haven't had any issues regarding wifi which is good as my last printer often had issues staying connected and the area where it is can be a little bit of a wifi dead zone on occasion. I'm desperately hoping for a refund or another replacement, I'm still waiting on HP to reply, if I get a replacement I will probably end up selling it to get some of the cost back. I wish I could contact Amazon about it but it says to contact HP on the order regarding issues.I will NOT be using HP again and am researching a replacement.Edited to add, I messaged Amazon even though not stated as eligible for return, within minutes they arranged a collection for it and the offer of a full refund. Amazon to the rescue! Replaced ot with a canon pixma and so, so much better in every regard!

Seems great and prints well. Only complaint is that it takes a long time to get teady?

Ordered yesterday, arrived today, installed in under 30 mins...v easy. Was expecting a drama inserting the print heads based on other reviews but really not difficult at all, just pay attn to the instructions & angle of insertion.It was a technological dream of an installation via the app...simple.If this lasts well & isn't unreliable it will have been a top purchase.

OverviewRecently, I purchased a Wi-Fi printer featuring refillable ink tanks from Amazon, and I am thoroughly impressed. This printer combines functionality, cost efficiency, and ease of use, making it a standout choice for both home and office environments.Design and Build QualityThe printer boasts a modern design that seamlessly fits into any workspace. The build quality is sturdy, with a compact footprint that saves valuable desk space. The refillable ink tank system is visibly integrated, allowing for easy access when refilling.Setup and ConnectivitySetting up the printer was a straightforward process. The installation instructions were clear, and the intuitive software made it easy to connect to my Wi-Fi network. The printer supports various connectivity options including USB and wireless printing from mobile devices.Print QualityThe print quality is exceptional, delivering sharp text and vibrant color images. It performs admirably for both black-and-white and color prints, a crucial factor in my decision-making process.Speed and PerformanceThis printer operates at impressive speeds, particularly during high-volume printing tasks. The first page comes out quickly, making it efficient for busy environments. It handles multiple documents with ease, demonstrating reliability under pressure.Ink EfficiencyThe standout feature of this printer is its refillable ink tank system. This design significantly reduces ink costs compared to traditional cartridges. The tanks hold a substantial amount of ink, allowing for fewer refills and minimizing interruptions. The transparent reservoirs make it easy to monitor ink levels, ensuring you won't run out unexpectedly.MaintenanceMaintenance is user-friendly, with easily accessible components for cleaning and upkeep. The printerâ s design allows for quick refills and minimal mess, enhancing the overall user experience.ConclusionIn conclusion, this Wi-Fi printer with refillable ink tanks has exceeded my expectations in every aspect. With its outstanding print quality, efficient performance, and cost-effective ink solution, it is a worthy investment for anyone in need of a reliable printing solution. I highly recommend this printer to both home users and small businesses alike, earning this product a deserving 5-star rating.