Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung
HobbyZone Float Set: AeroScout 1.1m, HBZ3811
Warnhinweise
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
Trish
Bewertet in den USA am7. November 2024
good add on to make ur aeroscout a water scout
Elemnt Marketing
Bewertet in den USA am6. Dezember 2024
Easy and fun addition to the Aeroscout. The instructions aren’t super clear but you can use common sense to figure it out. Once installed the floats are super solid and are great for water takeoffs and landings. The included rudder extension really helps it steer in the water.
Robert
Bewertet in den USA am22. August 2024
We bought the plane and float kit for my sons birthday. The plane is amazing but the float kit doesn’t line up with anything. We can’t use it and we can’t return it. Absolutely worthless.
Customer
Bewertet in den USA am15. Januar 2024
These are very well built. They are not easy to take off and seem difficult to put back on when they are assembled. Very pricey for what they are.
Anthony
Bewertet in den USA am14. Juli 2024
I haven’t even had an opportunity to fly the floats because attaching them is terrible. The nylon inserts in the floats are too tight for the M3x45mm screws. As I was tightening them, the head of one screw twisted off leaving the shaft inside the float. I could try drilling it out, but this shouldn’t have happened in the first place. Also, the floats can’t easily be removed and re-installed making switching from floats to wheels or vice versa difficult. I’ve emailed Hobby Zone about the broken screw. I’ll update my review when appropriate.
Produktempfehlungen
