Ihr Warenkorb ist leer
Ihr Warenkorb ist leerMartin
Bewertet in den USA am27. Juli 2024
For the price, you get gasket, regulator, filter, filter clips, pump.. dropped it in and it sounds great and worked right away. '18 wr250r wouldn't stay running, this pump fixed it. Only thing missing was the oring for the tip of the pump that goes in the housing.. used my old one.
Anthony
Bewertet in den USA am21. September 2024
Allowed gas to bypass the pump and gravity feed into the fuel line. I returned it and installed an OEM pump.
Josh
Bewertet in den USA am3. November 2023
After my fuel pump failed on my 2011 Wr250 I searched for a quality replacement that wasnt several hundred dollars like the OEM one that failed after only having 1500 miles. After installing this kit on my bike I have zero complaints. The bike is running great and I’m very pleased with the kit. Thanks
DABBLE
Bewertet in den USA am1. Mai 2023
My bike runs again. It is tricky, but doable to install this yourself. Watch at least 3 different youtube videos first until you are clear about a few things:1. You will need your own 3/8 ID tubing.2. You need to save the o-ring from the old pump.3. You need a good quality pick set ($20 for 3 or 4). I bent the heck out my $10 set, so not recommended.4. A vice is recommended to hold things while using the picks. But it's plastic, so don't over grip.5. You need to mark the orientation of the pump housing within the gas tank before removing the old one. A sharpie is good.It took me about 5 hours to complete it, including a trip to home deport for vinyl tubing.Watch some videos, and then DIY!
JossGal
Bewertet in Frankreich am 21. März 2022
Produit de très grande qualité équivalent au produit d'origine du fabricant
Produktempfehlungen
