Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Arcade Spinner unterstützt nur Arcade1UP Machine Asteroids Gamecontroller
1 x Arcade-Spinner in Industriequalität CNC EA-JM01.
2. Kompatibel mit Arcade1UP Astroids Spinner Machine Controller.
3. Kein Löten und Schneiden von Draht und Metallrahmen aus Legierung und langlebiges Design mit Doppel-Kugellager.
4. Plug and Play und einfachste Installation und Empfindlichkeit / Auflösung einstellbar.
Lieferumfang:
1 x Drehknopf.
1 x Spinner-Körper.
1 x Inbusschlüssel.
1 x Metallkissen.
1 x Kabelbaum.
10 x Schrauben.
1 x Bedienungsanleitung (in englischer Sprache).
MoonPatrol
Bewertet in Deutschland am 16. April 2023
Das Produkt ist zwar sehr gut verpackt, allerdings gibt es einen sehr hohen Drehwderstand, was auch in einem Video in den Rezensionen zu sehen ist.Zudem fehlt die komplette PIN Belegung für die Anschlüsse, was mir absolut unverständlich ist.
Paolo De Falco
Bewertet in Italien am 7. Februar 2022
Die Medien konnten nicht geladen werden.
David
Bewertet in Spanien am 21. August 2022
es un rollo, por mas que intento conectarlo a interfaces normales no lo consigoNo es compatible con ultimarc ni con otro parecido
ALESSANDRO B.
Bewertet in Italien am 10. August 2022
E un prodotto che deve essere abbinato per forza ad una sua scheda e ovviamente non e' acquistabile su amazon italialasciate perdere
Obi wan
Bewertet in Deutschland am 6. Dezember 2020
Fits perfectly. Quality ist very good.
Paul James Miller
Bewertet in Großbritannien am 26. November 2020
The so called 'User Manual' is just a sheet of paper with instructions on how to mount the spinner and the list of parts supplied in the box, both of which are blatantly obvious. What it doesn't contain is any information on the interface.They make the assumption that you are going to connect this thing to their interface board. However the interface board isn't available in the UK. You can buy it from Amazon USA at a reasonable price but then you have to pay as much again for postage and as much again for import duties so getting it from the USA you end up paying two and a half to three times a reasonable price.There is no information available on the interface to this device but looking at it on an oscilloscope it is a low voltage serial communication. There is no access to the quadrature signals from the magnetic sensors.To have any chance of interfacing to this thing without their interface board you would need to connect it to a microcontroller, an Arduino or a Raspberry Pi, and then you would have to start working out the baud rate and what communication protocol they were using.The mechanical part of the device is quite well machined and rotates smoothly but without the interface board actually connecting to this thing is a nightmare.
dougle
Bewertet in Großbritannien am 14. September 2020
I installed this spinner on the asteroids arcade 1up cabinet. This is perfect for playing Tempest
Produktempfehlungen
