Ihr Warenkorb ist leer
Ihr Warenkorb ist leer The module is equipped with ZMCT103C series small high-precision current transformer and high-precision operational amplifier circuit for accurate sampling and proper compensation of signals.It is convenient for signal acquisition of AC power within the range of 5A.The corresponding output analog AC signal can be adjusted.Required The output voltage can be adjusted according to the potentiometer (adjust the magnification, the magnification range is 0-100 times), but the maximum voltage of the output terminal (Out) will not exceed 1/2 VCC.The module is an output analog signal.
Specification:
Model: ZMCT103C
Rated input current: 5A
Rated output current: 5mA
Change rate: 1000:1
Phase difference: less than or equal to 20' (100 Ω)
Linear range: 0-10A (100 Ω )
Linearity: 0.2%
Accuracy class: 0.2
Insulation withstand voltage: 3000V
Operating temperature: -40° C^ 70° C
Sealing material: epoxy resin
Module power supply voltage: 5-30V DC
On-board precision miniature current transformer
On-board high-precision operational amplifier circuit, accurate sampling and proper compensation of signals and other functions
The module can measure AC current within 5A, and the corresponding output analog can be adjusted
PCB board size: 38 (mm) x18.5 (mm)
Instructions:
When measuring, the measured signal wire passes through the round hole of the transformer, VCC and GND are connected to the DC-30V power supply, VOUT and GND are connected to the oscilloscope, and the potentiometer is adjusted to obtain the waveform you want.The current increases and increases, but the maximum will not exceed 1/2VCC.
Package includes:
5 x Current Transformer
20 x Male and female DuPont cable
Johann Eckard
Bewertet in Frankreich am 4. November 2024
je ne réussis pas à l'intégrer dans mon montage arduino.quoique je face, la valeur de sortie n'évolue pas, quel que soit le courant.De plus il y a une valeur résiduelle de 2.4V !!!A fuir
Produktempfehlungen
