Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Parameters:
1.Input voltage: DC10-60V (direct input 10-60V without jumper cap selection voltage)
2.Input current: 20A (MAX) exceeds 15A, please add fan cooling (fan input current can reach 25A if the fan input voltage is 12-24V)
3.Static working current: 15 mA (12 V litre 20 V, the output voltage, the higher the current is increased quietly).
4.Output voltage: 12-83V infinitely adjustable (standard output is set to 19V, please set to other voltage values.) 12-83V fixed output (for large customers)
5.Output current: 18 A MAX More than 10 A, please increase the heat dissipation (based on the input and output voltage difference, the greater the difference pressure, the smaller the output current).
6.Constant current range: 0.5-18A (+/- 0.3A)
7.Battery protection: yes (9-50 V adjustable).
8.Working temperature: -40 ~ + 85 degrees (improve heat dissipation when the ambient temperature is too high)
9.Working frequency: 150 KHz.
10.Conversion efficiency: 92% -97% (efficiency and input and output voltage, current, pressure dependent)
11.Input over current protection: yes (input over 25A, automatic 12.protection, power is not increased)
13.Short circuit protection: yes (input 30A fuse) double short circuit protection, safer to use.
14.Input reverse polarity protection: Yes (150-A power MOS tube to prevent reverse polarity) Can be repolated for a long time)
15.Module size: 130x52x53mm/5.12x2.04x2.08in(LxWxH)
Special note is:
Do not adjust the current by short-circuit output. The circuit structure of the boost module cannot be adjusted by short-circuit.
Package includes:
1x1200W 20A boost converter
2x15A fuse
1xCooling Fan
4xCopper pillars
Pete J B
Bewertet in Großbritannien am 22. Juli 2024
Poor quality inductor floating insufficient silicon to hold in place. Adjusting pots not flat on pcb so may fatigue with vibration one of cable clamping screws got a melt mark like it’s been shorted. Also no hardware the standoffs missing also fan screws missing. Still yet to use it but wondering if it’s good or a reject due to burn mark on screw clamp. Will update if it works or not.
Customer
Bewertet in Großbritannien am 14. Juli 2024
The item is damaged
Produktempfehlungen
