Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Boost-Buck-Wandler, 5,5-30 V bis 0,5-30 V Step-Up-Down-Buck-Wandlerplatine, einstellbare Stromversorgung DC-Druckregelplatine Konstantstromregler-Wandler mit LCD-Digitalanzeige

Kostenloser Versand ab 25.99€

11.79€

5 .99 5.99€

Auf Lager

Info zu diesem Artikel

  • Drücken Sie die Taste, um den Ein- / Aus-Zustand des Ausgangspals zu kontrollieren und den Standard-Wert für Ein/Aus einzustellen.
  • Die Rückflussverhinderer am Ende des Ausgangs benötigen keine zusätzlichen Rückschlagdioden beim Laden des Akkus.
  • Kann erweitert und reduziert werden, die Ausgangsspannung ist einstellbar von 0,5 bis 30 V, der Begrenzungsstrom ist 0 bis 4 A.
  • Mit dem LCD-Display kann es die Eingangs- und Ausgangsspannung, den Ausgangsstrom und die Ausgangsleistung anzeigen.
  • Die Eingangsklemme verfügt über einen Rückschlagschutz, um zu verhindern, dass die Leiterplatte verbrannt wird.



Produktinformation

Industriewerkzeuge Maschinenteile

Teile für die mechanische Industrie

Boost Buck Converter

Einstellbares Buck-Boost-Modul: Voltage range is DC 5,5-30 V; Output Voltage range is DC 0,5-30 V, can be arbitrary adjustable; The output current range is 0-3 A, can be arbitrary adjustable, if enhance heat dissipation, it can reach 4 A; The output power can up to 35 W, if enhance power can enhance power can up to 35 W, if enhance enhance Ableitung, es kann reach 50w

Diagram-Modul

Taste Control: The IN/OUT button switches the display of input voltage and output voltage; Long press can switch the display of output current and output power; the ON/OFF button controls the output ON or OFF; Long press can set the default output state of the next power-on or off

Vorsichtsmaßnahmen:

1. Input In-Modul - muss nicht kurzgeschlossen sein mit Output Output Out, otherwise the constant current function will fail.

2. Please make sure that the power supply is always greater than the power required by the output load!

3. Wenn das Modul zur Ausgabe im vollen Load steht, muss die Eingangsspannung 8 V above sein. Wenn die Eingangsspannung 5 V ist, ist die Ausgangsleistung etwa 15 W und die Volt-Ampere-Meter aus. The current value module is as large as 4A, provided that it is limited by the large output pow

Produkttyp: Step Up Down Modul
Material: Leiterplatte
Eingangsspannung: 5,5 – 30 V (wenn die Eingangsspannung 5 V beträgt, kann es auch Stufen des Auf- und Abstiegs erreichen, aber die Messung von Spannung und Strom ist nicht genau; wenn weniger als 4,7 V ist, Unterspannungsschutz)
Ausgangsspannung: 0,5 – 30 V
Ausgangsstrom: Kann für eine lange Zeit stabil bei 3 A arbeiten und kann 4 A unter verbesserter Wärmeableitung erreichen
Ausgangsleistung: Natürliche Wärmeableitung, 35 W, verbesserte Wärmeableitung, 50 W
Unterspannungsanzeige: 0,05 V
Aktueller Anzeigezweig: 0,005 A
Umwandlungseffizienz: ca. 88 %
Sanftanlauf: Unterstützung (das Lademodul mit sehr hoher Leistung kann beim Start fehlen)
Arbeitsfrequenz: 180 kHz
Lieferumfang: 1 x Step Up Down Modul, 1 x Kühlkörper

Pereira
Bewertet in Spanien am 16. Januar 2025
It works correctly, although the output voltage is always a bit different than what's shown in the LCD, at most I've noticed a discrepancy of 1-1.5V when Stepping Up and a negligible difference when Stepping Down.Basically, for most projects is fine and extremely good for the price, but for projects that need voltage accuracy, get a better one.Check always with a multi meter, of course.
Produktempfehlungen

14.99€

6 .99 6.99€

4.4
Option wählen

14.29€

7 .99 7.99€

4.8
Option wählen

34.41€

16 .99 16.99€

5.0
Option wählen