Ihr Warenkorb ist leer
Ihr Warenkorb ist leerMax Voltage:300V AC/ 48V DC, Continuous Rating:100A AC/DC
andrew g
Bewertet in den USA am17. Juni 2021
Had to find larger size at great price
Chris
Bewertet in den USA am7. September 2020
I bought this BusBar when rewiring my helm and it worked really well to replace the existing 10-gang model that was originally installed. I was able to clean up the wiring and get rid of most of the doubled up wires. No measurable voltage drop.
TW
Bewertet in den USA am8. März 2019
The BlueSea 20 screw unit (ASIN B000K2NZ3C) is a excellent bus bar. Unlike many the 1/4" studs are held captive from behind, allowing 1 nut on top to secure the ring lug directly to the bus bar, not between another steel nut (steel is a poor conductor). Combined with the thick 1/8" actual copper bar with tin plate, the resistance from end-to-end was less than I can probably measure with a 4-wire ohm measurement (0.1milliohm), unlike another I tried that was 9x greater. I especially like the captive star washers on the screws - the other unit I tried the washers either got lost, or kept getting between the lug and the bar.Now to find a source for good #8 ring lugs.
Chris G.
Bewertet in den USA am10. Juli 2019
it was much larger than i thought it was when i bought it but i didnt read the description closely... it was my fault. but i will be able to use it in the future... well made product
Mark D.
Bewertet in den USA am3. Mai 2017
In response to Jeff O. and his answer, he is mostly correct except when in a Marine application (especially in the Bilge or Engine Compartment area) a cover of some sort, for any "Buss Bar" (positive or negative), is highly recommended. The tighter the fit the better. Mark D.
Produktempfehlungen
