Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDie AVF EM60B-A ist ein Paar Universal-Mikrowellen-Halterungen, mit denen Sie Ihre Mikrowelle sicher an der Wand montieren und Platz in der Küche schaffen können. Die Arme erstrecken sich von 11. 12.7 cm bis 17 7 Zoll und es kann ein maximales Gewicht von 45 kg tragen.
Ankush Raykarz
Bewertet in Indien am 1. Januar 2025
Certainly! Here's a revised and properly formatted version of your statement:---"I do not recommend purchasing this product from this seller. The quality is very poor, with rusty parts and low-quality screws. The product failed to hold even an 18 kg microwave, making it completely unreliable and a waste of money."
Der Pfleger
Bewertet in Deutschland am 6. Oktober 2024
Aufgepasst, nicht jede Mikrowelle kann an dir Wand gehangen bzw. Auf solche Winkel angebracht werden.
Elaine A
Bewertet in den USA am29. September 2024
I purchased 2 sets of brackets for my microwave and my toaster oven to sit on in my kitchen. Very sturdy and strong to hold the appliances. Great value for the money
CFS
Bewertet in Deutschland am 18. Dezember 2024
Ich konnte die Mikrowelle nicht installieren, da die Halterungen nicht zu meiner Mikrowelle passten, da die Mikrowellenfüße nicht in einer geraden Linie standen.
Paul
Bewertet in Australien am 19. Juni 2023
A major component was missing, very annoyed. This could of been avoided if the packer checked before Sealing the parcel. Now the item requires re ordering. Waiting for a refund, running around to return the item. Really nothing positive to say about my experience.
Kelliar
Bewertet in den USA am21. Oktober 2021
We have a large 1.6 cubic feet panasonic microwave (about 22" x 20" x 12") that weighs almost 40 lbs and these brackets are working perfectly to hold it up off the counter! It's been about 2 months so far and we use the microwave many times a day. There have been no issues, it's holding up great with no sagging or anything else.To solve the problem people have with the brackets being slippery, we simply stuck some clear cabinet bumper pads on the top of the brackets. They are nonslip and hold the heavy microwave right where we put it. No slipping at all - it hasn't moved at all being used probably hundreds of times already. Very quick, easy and simple solution.You do have to be aware of what the underside of your microwave looks like - ours has all sorts of obstacles that we had to avoid so we couldn't have them at equal distance from each side of the microwave. To compensate for one side being heavier than the other (it was pulling down the bracket more on the left side due to the little bit of extra weight on on that side), we simply put thicker bumpers underneath the heavier side to give it an extra lift so now it looks level.To solve our own problem of wanting to use this in a corner, we made some spacers out of scrap wood so we had a solid surface that was parallel to the back of the microwave to attach the brackets to (photo attached). It's a great solution to be able to keep the microwave in the corner where we're used to having it.I did a super budget friendly paint-and-hardware-only kitchen upgrade - I couldn't handle looking at our orange, red, green and flesh colored kitchen for another day, but we aren't ready for a real kitchen remodel yet - no replacing appliances was allowed. But then of course our microwave died and we had to get a new one to survive - which wound up being much bigger than our old one. This really makes the limited counter space feel more spacious and it's very easy to clean underneath and around the microwave now. Win/win.Overall these brackets are SUPER STURDY, well made and if it can hold our giant microwave I'm sure it can hold pretty much any microwave. And if you are installing them on a pre-existing wall and not on a corner installation will be much easier and simpler than what we had to do for our special corner mount (but just wanted to let people know that's possible to do too). We are very pleased with them and would recommend them. Hope this helps you make a more informed decision!
Isherlaufer
Bewertet in Kanada am 26. Oktober 2018
These wall brackets are very sturdy and were simple to put together and mount on the wall. I centered them just on the inside of the microwave's feet to keep it wedged from moving side to side. I had to use drywall anchors on the left side due to the width between the brackets. It doesn't seem to affect the sturdiness of the install.One minor issue is that the microwave can slide away from the wall as there is nothing to attach the bracket to the bottom of the microwave. I added about 2 inches of Velcro to the end of the bracket bases. This seems to have done the trick. It's been up for about 2 weeks now and I have had no slipping or any other issues whatsoever.If you have the wall space to get your microwave off the counter, I highly recommend these brackets. They are great!
Produktempfehlungen
