Ihr Warenkorb ist leer
Ihr Warenkorb ist leerEin ACDelco GM Original Equipment Dampfkanister Entlüftungsventil ist eine Emissionskontrollkomponente und ist ein von Gentechniker empfohlener Ersatz für das Originalteil Ihres Fahrzeugs. Dieses Ventil, wenn es geöffnet ist, lässt Luft in und aus dem Dampfkanisterventil strömen. Dieses Original-Dampfkanister-Entlüftungsventil wurde für Ihr GM-Fahrzeug hergestellt, bietet die gleiche Leistung, Haltbarkeit und Lebensdauer, die Sie von General Motors erwarten.
SULTAN
Bewertet in Saudi-Arabien am 4. September 2024
اصلي بس ناقص توصيله بالاغلب موديل 2009 وطالع راكبه من المصنع ما يحتاج تطلبها
Customer
Bewertet in Mexiko am 17. November 2023
Pieza original
Customer
Bewertet in Kanada am 10. September 2021
Put it on my 07 yukon works great so far.
Mike
Bewertet in den USA am31. Dezember 2018
I have a 2009 Chevy Tahoe that issued a P0449 Code. I bought this and the ACDelco 19257603 plug adapter. This was very easy to change and took me about 1hr. It took 30 min to get the stupid spare tire off. It was stuck and I had to use a long screw driver to release the safety lock. This canister comes with a new steel bracket and all new hoses. I absolutely needed the ACDELCO 19257603 Adapter since this canister has the updated electrical plug.This is an updated canister. The hoses are shaped a bit different than the factory original. I had the route the stiff hose under the charcoal box then up instead of above it and then down. This was a non-issue but just wanted to make a note of it. The flexible breather hose fit fine and came with zip ties to fasten it to the frame. Also note that this will not fit the old steel bracket. The canister comes with a new bracket and I had to use it to get the canister to sit in the correct position. The old bracket will causes the canister to be installed incorrectly which will pinch the stiff pipe. The new bracket worked perfect and all the pipes fit as they should - use a 13mm wrench to remove the single bolt holding it on the frame.. Overall this was a very easy change and the only tools I needed was a 13mm wrench, flat screw driver, and wire cutters to cut the old zip ties, and a $10 code reader to reset the code.
Layth Saffarini
The GM agency asked for 6000 dhs to fix the problem i had that when i stop at a gas station , the fuel pump keeps stopping when fueling which was super annoying and it takes so much time to fill a full tank, watched a couple of YouTube videos on how to fix this issue and bought this amazing product which came from the USA within 5 days with normal shipping, the installation took me 1 hr and i had no previous mechanical experience, very easy to install and the problem was solved and no more check engine light, very happy and satisfied
Produktempfehlungen
