Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
1200 mm/48 inch Fliesenschneider
- Modell:RJ1200JCSGUE
- Material: Aluminium
- Max. Schnittgröße: 48" /1200 mm
- Min. Schnittgröße: 1.38" / 35 mm
- Max. Schnittstärke: 0.24"-0.59" / 6-15 mm
- Führungsschiene: Zweigleisig
- Packungsgröße: 58.3" x 7.9" x 6.7" / 148 x 20 x 17 cm
- Artikelgewicht: 44 lbs /20 kg
Produktvorteile
Langlebiges Aluminiummaterial
Die Führungsschienenbasis besteht aus gegossenem Aluminium
Die Basis besteht aus Aluminiumprofil
Linearlagerschieber
Einzigartiges Design von Linearlagern
Aluminium Schieber für flexibles Schieben
Stabile Führungsschiene
Stabile Führungsschiene
Führungsschiene mit 25mm Durchmesser
Stabileres Schneiden
Arbeitsschritte
Schritt 1.Positionierung
1.Passen Sie die Schieberegler auf beiden Skalen an.
2.Halten Sie den Griff mit einer Hand und bewegen Sie den Schieberegler zum Ende der Spur.
3.Legen Sie die Fliese flach auf die Basis, so dass eine Seite der Fliese gegen den mit der Skala bedruckten Aluminiumblock liegt. eine andere Seite ruht auf zwei Kunststoff-Schiebern.
Schritt 2.Lineation
1.Bewege den Griff so, dass das Messerrad die Kante der Fliese berührt.
2.Bewegen Sie den Griff nach vorne, so dass das Schneidrad eine gerade Linie auf der Fliese markiert. Wenn diese Linie nicht durchgehend ist, ist es möglicherweise nicht möglich, die Fliese zu schneiden.
Schritt 3.Zuschnitt
1.Raise handle and pull backward gently to make pressing block settled steadily on the front end ofthe tile. Push down with adequate force and your tile will be divided apart along the line.
Anil Kesavan
Bewertet in Großbritannien am 25. Februar 2025
Great product
M. Corless
Bewertet in Großbritannien am 22. April 2025
Bought this to cut tiles for my bathroom project, it did a really good job cutting 1200 x 600 ceramic tiles, did about 30 cuts, and still perfect.Great tool to have for the next job.
DAVE COOKE
Bewertet in Großbritannien am 5. November 2024
Die Medien konnten nicht geladen werden.
Andy
Bewertet in Großbritannien am 19. Oktober 2024
We are refitting our kitchen and we decided that we would go for underfloor heating this means new floor very large thick tiles throughout the kitchen however we have also decided on continuing through the hallway and other downstairs rooms. This is a big job that we are doing ourselves so we decided to invest in a good quality tile cutting machine. We took advice on this from a professional tiler that we know because we were split between a manual and powered machine. This manual cutter is the machine our friend advised to purchase. this is not a cheap machine so we would not have just gone for this on whim but when someone who does this thing for a living you accept their advice. this machine arrived a few days ago as we are not ready to lay the floor yet I decided to test the machine with a tile that was cracked and chipped on arrival. My first cut was not successful because I didn't apply enough pressure, however once I had applied the right amount of pressure the tile cut perfectly.the cutter machine is large and heavy, I am glad we don't need to move it about too much as this machine is 20kgs in weight. The base is made from reinforced aluminium with aluminium side platform guides. The 2 steel guide rails are a sturdy 25mm diameter. There is a magnetic aluminium pressing block that can be positioned at any point along the cutting area making splitting the tile very easy. the bearings on the slide rail run very smooth when cutting the tile. This maximum cutting length of this machine is a massive 1200mm and the minimum cutting width is 35mm. you can cut tiles any thickness from 6mm to 15mm. the tiles we are using are a thick 10mm and it cut the practice one without any problems.All in all this is a great tile cutting machine that is excellent for our purpose but is a far more professional machine than I would normally need. The is a sturdy machine that will be a great workhorse one the coming months as we re tile the whole downstairs. recommended..
Reviewer
Bewertet in Großbritannien am 18. Oktober 2024
The ROJOO 48-inch Double Slide Rail Manual Tile Cutting Machine is a manual tile cutter designed for professional or DIY users. Although I'm no expert, I'd say though that it's probably geared more towards professionals, as due to its size, it's primarily for cutting larger tiles, for example oversized tiles, bigger floor or wall tiles etc.It's 55" (1.4 metres) tall (as tall as me), with a maximum cutting length of 48" (1.20 metres), a minimum cutting width of1.38" (35mm), and cutting thickness between 0.24" - 0.6" (6mm - 15mm).The machine features a dual rail system, which offers smoother, more accurate cuts. This ensures greater stability and precision when cutting tiles.The frame is made from solid materials, which should ensure durability and longevity even with regular use. We found that the solid build also enhanced stability during the cutting process.Being a manual cutter, it does not require electricity, which can be a pro if working professionally on a site with limited access to power. It relies on scoring the tile and snapping it with pressure.We needed to re-tile a kitchen splashback and this made the job a breeze compared to the very small and not so sturdy tile cutter for DIYers we have. We are now looking at the re-tiling the rest of the kitchen and bathroom, as well as tiling our downstairs cloakroom now we have this tool to make it so much easier.The only two small downsides are that, firstly, no instructions were included in the box. There are instructions, including a video, on the product description page, and my husband has used tile cutters before so could find his way around it, but it's more convenient to have them on a leaflet in the box to easily refer to if needed. Secondly, it's a little large and heavy, so not the most convenient thing to transport from job to job. That said, some weight is to be expected for something as good a quality as this, and the advantages to this tile cutter most certainly outweigh these two minor niggles.In short, this is an excellent tile cutter, particularly for those working with oversized tiles or looking for a manual cutting solution, and although solid and long, it is still portable. Its precision and durability make it a great choice in its category, and we, well my husband in particular, are delighted with it.
Produktempfehlungen