Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDie 3M Performance Sprühpistole wurde für den modernen professionellen Lackierer entwickelt und ist die erste Sprühpistole, die speziell entwickelt wurde, um Ihnen Zeit zu sparen und gleichzeitig erstklassige Leistung zu liefern. Das Set beinhaltet 1 Sprühpistole, je 5 Zerstäuberköpfe in den Größen 1,2, 1,3 und 1,4, eine 3M PPS Serie 2.0 Cup, 5 Einweg-Einlagen in Standardgröße, 4 Einwegdeckel in Standardgröße mit 200-Mikron-Filter, 1 Einwegdeckel mit 125-Mikron-Filter, 3 Verschlussstopfen und 1 Luftstromregelventil. Mit hoher Übertragungseffizienz, einem großen, einstellbaren Lüftermuster und reibungslosem Auslösezug ist es alles, was Sie von Ihrer besten Metall-Spritzpistole erwarten – nur intelligenter. Mit der 3M™ Performance Sprühpistole können Sie weniger Farbe mischen und trotzdem die Deckkraft erhalten, die Sie erwarten. Unser zum Patent angemeldetes austauschbares Düsensystem ist in sechs Größen von 1,2 bis 2,0 erhältlich, um eine vollständige Palette von Hochleistungs-Automobilbeschichtungen zu sprühen, einschließlich Vollfarben, Perlen, Metallic, Klarlacke, Versiegelungen und Grundierungen. Und der Schnelldrehverschluss sichert die Düse am Körper der Spritzpistole, so dass Sie sicher sein können, dass sie in Position bleibt und stark sprüht. Mit einem integrierten System, das schnell wechselbare Düsen und 3M PPS Serie 2.0 Sprühbecher enthält, wird Farbe nie durch den Spritzpistolenkörper gelangt. Das bedeutet: Keine Farbreste mehr, die innere Komponenten aufkleben, keine Demontage Ihrer Sprühpistole oder Einweichen von Lösungsmitteln mehr, keine Kreuzkontamination mehr, die Ihre Arbeit gefährdet wird. Hergestellt aus einem schlagfesten Verbundmaterial, verstärkt mit Edelstahl, ist die 3M™ Performance Sprühpistole die leichteste Sprühpistole der Branche – und das alles unter Beibehaltung der Leistung und Leistung, die Sie als professioneller Maler erwarten.
Rod
Bewertet in den USA am31. Januar 2025
I have been using the first iteration of this system for a few years. A few weeks ago the gun broke. The design on the 2.0 system is great for connecting the cups and paint nozzle. Cleaning is a breeze and adjusting the pattern is super easy. The old system was much more difficult to connect the gun to the replacement heads, this design is so much better. I did my first base/clear job last week and it looks professionally done. I am actually looking forward to painting with this system, I highly recommend this.
Jason
Bewertet in den USA am8. Mai 2024
I have a number of spray guns at all kinds of price points. I have nice guns for things like automotive paint. I have cheap guns for nasty catalyzed things that can ruin guns like high build primers. I have pressure pots for... well, not much because they are a nightmare to clean.Since purchasing this, I have not touched any of my other equipment at all (with one exception). We recently built a bunch of composite tooling that required LOTS of catalyzed high build polyester primer. These often have a very short work time, like 10 minutes or less, and I liked the idea of being able to toss the nozzle if the coating went off in the gun. I've probably sprayed 20 gallons of Duratec primer with this gun and the 2.0 nozzles.I've also sprayed some much finer coatings with the smaller nozzles including automotive base and clear. To my surprise, the finish quality was superior to any other gun I've used AND it is super easy to dial in for exactly what you want. Cleanup is a breeze no matter what you use. The supposedly "disposable" nozzles last nearly forever and require very little solvent or time to clean.Before purchasing, I really didn't like the idea of "consumable" waste from the single use liners. However, with the enormous amount of solvent and time you save I think they easily pay for themselves.The only thing I can complain about is that there is no nozzle bigger than 2.0mm. I spray a lot of gel coat as well and the 2.0 is marginal for that. So I do still have to use a traditional dump gun for bigger gel coat jobs. I have actually drilled out an older nozzle to about 2.4 and it works ok, but obviously the spray quality suffers a bit.Since this is targeted at the automotive crowd, 2.0 is huge. But I'd be willing to be there are a lot of people out there wanting to use this for gel coat. Everyone hates messy dump guns and this could totally replace them if they released bigger nozzles.Still, this is an outstanding do-nearly-everything gun and I'd highly recommend it to anyone.
MaAkk
Bewertet in Kanada am 30. November 2024
All the cars I paint come out perfect with this gun. A must have for all body shops and it doesn’t break the bank.
Jill
Bewertet in Kanada am 28. Dezember 2024
First time spraying and this gun, was awsome. Easy tonuse, setup was easy agter watching some youtube videos, clean up is really easy for the tips. My only issues was the orange peel on a single stage was a bit more the I'd have liked to see. Deffinitly watch some videos fro. Eastwood and PaintSociety there's a lot of good information out there to help.I didn't really do any testing before hand so I'm not blaming the gun. The paint Clerk told me to use a 1.8 and 3m said a 1.6 so I'm thinking it was a bit big and although i was using a larger compressor on a single 25ft hose my air spraying pressure was lower then I'd like to see. Deffinitly think i need to play around with the system more but still really happy with the purchase. I found I was using at least 2to3 cups per panel just between all the coats so order lots of cups!
LM
Bewertet in Mexiko am 18. November 2021
Usó en pintura automotriz
Produktempfehlungen
47.39€
21 .99 € 21.99€