Levererades med en sne probe tip

Die Installation ist denkbar einfach. Die Genauigkeit der Antastung liegt im Bereich von 0,01 - 0,02mm. Wenn man 2 mal anfährt (erst schnell, dann langsam), erhöht sich die Genauigkeit deutlich.

Nice little thing. Smaller than expected which is good for me. I have one of those desk top mills so space can be tight. Max diameter 30mm. Overall length 67mm of which shank 20mm (x d6mm), body 21mm, probe 26mm. Probe as fitted in a 2mm ball but it takes standard dial indicator probes (M2.5 thread) so you can use your disks and extenders to reference trickier surfaces. The connector is USB-C shape/style/repurposed not sealed so put it away before you start cutting. Measured on the bench, first contact to signal out was 0.125mm on X/Y axis (assuming the connector as origin) to 0.090mm at 45 degrees. So that to factor in if you need precision.-------------------------Added to original reviewTested on Mill with 0.005mm glass scales: Testing 60mm 1-2-3 block (60.004 measured) . With 2 mm ball (1.998 measured) as fitted.90deg to cable: light on /connect 60 + 1.790 light off/disconnect 60 + 1.745 (1.790 - 0.045)in line with cable: light on /connect 60 + 1.770 light off/disconnect 60 + 1.755) (1.770 - 0.015)45 deg to cable: light on /connect 60 + 1.785 light off/disconnect 60 + 1.770) (1.785 - 0.015)So taking mid of extremes of 1.80 as the, effective half ball size(rather than 1.00). The error range is +/- 0.01, exactly as specified and given the measurement error of at least +/- 0.005 is very pleasing.

Produkt funktioniert wie gewünscht, Lieferung bereits vor dem anvisierten Termin - Sehr GUT !!

Used on Mach4 with a smoothestepper, no issues at all.Plotted the surface of a large pebble sing the surface map wizzard and engraved it nicely. probe is sensitive enough for my needs, the touch off on the default wizzard settings is good.