Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Product Name: High Precision Extension Rod
Model C10 C12 C16 C20 C25 C32 C40
Material High Quality 42CrMnTi steel
Hardness: HRC50-55
Precision: 0.003mm
Shank Diameter: 10mm/12mm/16mm/20mm/25mm/32mm/40mm
Length: 60mm/100mm/150mm/200mm
Features
Best used for deep hole working - Extension rod diameter and the other parts are precision ground to eliminate imbalances, increased stability during cutting, tighten the nut directly, high rigidity - Extremely powerful clamping force
Fast and efficient deep hole processing
BT/NT/MT series products can not reach the processing depth, using the straight handle ER handle can easily reach your ideal deep hole processing depth.
How to install and use the nut?
The internal oval design of the nut is a normal design. It is recommended to install the chuck according to the following steps:
1. Insert the chuck diagonally from the side of the nut with the smallest oval diameter.
2. Gently push the chuck to make the chuck fully enter the inside of the oval.
3. After installing the chuck inside the nut, the fixture (for example: milling cutter, woodworking knife, etc.) is installed.
4. The disassembly steps are the same. (If there is a milling cutter, please remove the milling cutter first)
The priority is to install the chuck into the nut without falling, and then place it in the tool holder to tighten the nut.
The chuck is a spring chuck, the tighter the screw, the greater the clamping strength.
25.03€
11 .99 € 11.99€
24.13€
10 .99 € 10.99€
143.80€
70 .99 € 70.99€