Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

DIYmalls 0,96 'Zoll OLED Display Screen Module I2C IIC 128x64 SS D 1306 3.3V-5V Gelb + Blau für Arduino U NO ESP32 (3er-Pack)

Kostenloser Versand ab 25.99€

14.98€

6 .99 6.99€

Auf Lager
  • -0,96 OLED lässt sich problemlos über I2C über vier Leitungen (Strom, Masse, Takt und Daten) an Adresse 0x3c verbinden. Die Adresse ist mit etwas Löten veränderbar, aber wenn Sie es nicht wirklich brauchen, riskieren Sie es nicht.
  • -Die tatsächliche (7-Bit) I2C-Adresse von OLED ist 0x3C, nicht 3D, nicht die (8-Bit-)Adresse, die auf der Rückseite des Bildschirms aufgedruckt ist, 0x78 oder 0x7A. 0x78 wird 0x3C um 1 Bit nach links verschoben, so dass I2C-Adressen auf dem Bus gesendet werden. Sie müssen diese Adresse in jeder Skizze richtig definieren, sonst werden keine Daten an das Display gesendet und Sie können sie fälschlicherweise für DOA halten.
  • - Dies ist ein "monochromer" Bildschirm mit gelben LEDs oben 1/4 und blauen LEDs auf den unteren 3/4 des Bildschirms. Sie können diese Farben nicht kontrollieren. Sie sind fixiert. Dies ist jedoch nützlich, wenn Sie eine Überschrift in Gelb und dann unten in Blau anzeigen möchten.
  • -Sie erhalten volle 128x64 Pixel, aber es gibt eine Lücke zwischen dem gelben und dem blauen Bereich. Sie erhalten also oben 128 x 16 gelbe Pixel und darunter 128 x 48 Pixel, die alle verwendbar sind, wobei beide Teile durch eine Lücke getrennt sind, die ungefähr der Breite von 2 Pixeln entspricht.
  • -Kommt mit 3x 0,96 oled mit bereits angelöteten Stiftleisten, so dass kein Löten erforderlich ist.



Produktinformation

16x2 lcd display
1.8 tft lcd
1602 lcd display
3.2 esp32 display ips

Daniel
Bewertet in Großbritannien am 4. Januar 2024
Lovely addition to your arduino and opens up a whole new world of possibilities with a super high quality efficient OLED screen. Would recommend!
le lapin masqué
Bewertet in Frankreich am 19. Februar 2024
J'en ai d'autres, bi-colores ou blancs, qui ont la fâcheuse disposition des broches en GND-VCC-SCL-SDA. Mais celui-là, c'est VCC-GND-SCL-SDA, ordre compatible broche à broche avec d'autres modules breakout I2C (genre BMP280, MPU6050) que j'ai pu souder directement sur l'embase de l'écran. Cool !Question luminosité, pas plus pas moins que les autres marques. En plein soleil, c'est plutôt limite mais bon, on peut faire avec.
Black - Recensioni
Bewertet in Italien am 3. Dezember 2023
Nella confezione sono presenti 3 schermi OLED da 0.96". Sono abbastanza piccoli ma molto utili per creare progetti interessanti con Arduino e compatibili (nodeMCU per esempio). Il collegamento avviene attraverso un semplice sketch(che si può trovare anche online) e la configurazione è semplice attraverso 4 PIN. Nella confezione sono presenti anche dei jumper maschio/femmina che ho molto apprezzato perché mi ha semplificato il collegamento. I PIN sono già saldati sulla scheda per cui non é necessario saldare.Io ho preso quelli con scritta gialla e blu. Si fa notare che solo la prima riga dello schermo è gialla e che la colorazione non è un parametro configurabile(quindi la prima riga sarà sempre gialla e le altre a seguire sempre blu). Si ha anche la possibilità di prendere gli schermi con solo colorazione bianca. Io ho preferito questi per dare un tocco di colore.In definitiva un buon prodotto con un buon rapporto qualità/prezzo considerando anche la quantità presente in confezione.
Techlead
Bewertet in Deutschland am 29. November 2023
Das kleine 0,96-Zoll-OLED-Display ist ein brillantes Produkt! Mit I2C/IIC und einer Auflösung von 128x64 Pixel ist es perfekt für Arduino-Projekte. Das gelb-blaue Farbschema sorgt für klare Sichtbarkeit. In einem praktischen 3er-Pack bietet es Flexibilität und Zuverlässigkeit für meine DIY-Elektronikexperimente. Ein Muss für jeden Bastler und Arduino-Enthusiasten!
tom444
Bewertet in Deutschland am 25. November 2023
Die Medien konnten nicht geladen werden.
Amz Customer
Bewertet in Kanada am 17. November 2023
These 128x64 OLED displays are great. Even though the two colors are fixed, there's a lot you can do with a heading and a body, and you can put a display like this on anything from thermometers to computer keyboards.The photos and videos in the product page and other reviews don't do the screen quality justice. The cameras show a lot of bloom but there's none in person. Very clear, crisp, and vivid.These come with no documentation, which is not uncommon, so some research will be necessary. However, there's plenty out there for SSD1306 displays, from Arduino example to QMK support, so it was straightforward enough to get them working. I'll need to do a lot more experimenting to use these to their potential though.
J. Cornell
Bewertet in den USA am10. November 2023
When building small single board computer projects, Arduino or Raspberry Pi for example, Nothing looks as nice as a color screen of information. These OLED displays are the height of cool when showing your favorite project to friends and family.One nice part of these displays is they are highly customizable and if you can visualize it, they can display it.I am going to retro fit these to a couple of projects I keep around just to show people what cool things you can do with a bit of time and an inexpensive board.
Produktempfehlungen

14.18€

6 .99 6.99€

4.9
Option wählen