Ihr Warenkorb ist leer
Ihr Warenkorb ist leerClaudia
Bewertet in Deutschland am 30. Juli 2023
Leider kann ich den Verkäufer überhaupt nicht weiterempfehlen. Lassen einem bei einem defektem Teil total im Stich. Eigentlich haben die 5- Sterne verdient, aber leider muss man auf einen drücken, ansonsten kommt man nicht weiter.
Michael Illgen
Bewertet in Deutschland am 12. Mai 2022
Netzteilstecker ist nicht, wie angegeben, Typ C. Deshalb passt es in Deutschland nicht.
Pat_
Bewertet in Deutschland am 8. Juni 2019
Gute Unterstützung für viele Einsätze.Benutze diese als Ventilator Ersatz am PC, Bett, PC kühlung...Das control panel macht das was es soll. Schade das es keine Uhrzeit Anzeige hat.Die Lüfter werden bei hoher Drehzahl etwas lauter können aber mit etwas Geschick gegen andere 120mm Lüfter ausgetauscht werden.Das Gehäuse wo die Lüfter drinnen sind besteht aus gutem Plastik zumindest für mein Gefühl. Die Front aus alu fühlt sich wertig an. Beigelegt ist eine Schablone zum einzeichnen von Regalen, Platten etcPreislich etwas hoch angesetztWerde irgendwann daraus ein PC gehäuse basteln
Bryan N.
Bewertet in Australien am 15. März 2019
I couldn't have asked for better service and product. Great job.
Dorothee F.
Bewertet in Deutschland am 18. November 2018
Ich habe einen Kellerraum als Herren-Lounge eingerichtet. Whiskey, Rotwein und eine gute Zigarre. So war es gedacht und als das erste Mal 4 Männer im kleinen Raum saßen und jeder eine Zigarre rauchte, da war es eine Nebelkammer.Eine Lösung musste her - für das kleine Kellerfenster.Nach vielen Recherchen bei Amazon bin ich auf diese Lüftereinheit gekommen. Sie sieht professionell und chick aus, ist theoretisch mit USB-Powerbanks zu betreiben und soll extrem leise sein. Ferner gibt es die Steuereinheit.Ein einfacher Karton wurde geliefert. Beim Öffnen die erste Begeisterung. Die Oberfläche sieht SEHR GUT aus und fühlt sich sehr wertig an. Es liegen Schablonen aus Kunststoff bei, so dass man leicht die Umrisse für das Ausschneiden anzeichnen kann - TOP.Da die Lüfter nicht in die Luft in den Raum hinein befördern sollten (Standard-Richtung), so musste ich 24 Schrauben lösen, die Lüfter herumdrehen und die Schrauben wieder befestigen (geht sehr gut und leicht von der Hand).Nach dem Ausschnitt aus dem Brett mit Holzbohrer am Akkuschrauber und einer Stichsäge, konnte ich die beiden Einheiten leicht einsetzen und miteinander verbinden (einfache USB-Stecker). Nun das Netzteil angeschlossen und über die Steuereinheit die volle Geschwindigkeit gewählt, war ich doch ein Bisschen enttäuscht über so wenig Luftbewegung. Doch als das Brett im Fenster platziert wurde und die Lüfter auf höchster Stufe liefen, war ich begeistert. Denn zum einen waren die Lüfter extrem leise und zum anderen war ausreichend Lufttransport nach Draußen vorhanden.Ich bin begeistert und kann dieses Lüftersystem zu 100 % empfehlen.Nur der Ordnung halber möchte ich erwähnen, dass ich keine professionellen oder bezahlten Bewertungen vornehme. Ich habe den Artikel zum vollen Preis gekauft und auch nachträglich keinen Rabatt oder andere Zuwendungen erhalten. Rezensionen sollen FAIR sein und objektiv von Kunde an Kunde gerichtet sein.MEINE EMPFEHLUNG !!!
Mr J.
Bewertet in Großbritannien am 9. September 2017
Using it on my homebuilt server rack to force air through from the front of the disk storage (12 bays so generates quite a bit of heat) and its been great this summer. Previously the inbuilt fans on the DAS (direct attached storage) would ramp up from the default slowest of 1, to 2 or 3 when we had hot days. With this driving a gentle feed of air in addition it's stayed at 1 even on the hottest days, and the additional noise is only very slightly detectable, whereas the DAS going up to its 2nd speed is over twice the db of level 1.Great addition to the home server setup.
Benjamin Wilson
Bewertet in den USA am6. März 2017
I have been using these fans and controller since early November (about 5 months), and they have performed excellent! I'm very happy with this setup.I bought these to help cool my computer, which resides in a desk with a built in computer cabinet. The desk design does not really allow any air flow to the computer, and this setup was used in combination of a couple of other computer and desk modifications.My first impression of this product came with the packaging. The box for the fans and controller was shipped within another box with padding so as not to disrupt the products in transport. Upon opening the package, the products are very neatly organized and include additional packing material; very well thought out and securely placed so they can not shift with handling. The brushed metal finish looks amazing!Installation was straightforward; both the fan assembly and the digital control unit have plastic templates included, which help tremendously with the required drilling and cutting. Hardware is included, and there are bolt and nut fasteners and wood screws to use, depending on your method of installation.For my installation, the wiring included was a bit long, but this allows different mounting configurations. Some command hooks to hold the wiring on place was all I needed to clean up the interior appearance.I leave my unit on 24/7 connected to AC power in the "Smart" mode setting. The backlight can be configured to be on all the time, or set to automatically turn off after a few seconds (I chose this setting).Everything works as I need, the fans are quite quiet (can run full speed while watching movies and they aren't noticeable). This is a set it and forge it type of product
C0d3r.N3T
Bewertet in den USA am9. Oktober 2015
After scouring the internet for a solution to make my own fan array for my office networking gear, switching, modem and VivoPC bundle, hidden in a nice little cabinet which was getting way too hot. I was so happy I found this T9 setup. It is a really nicely built product, not cheap feel in terms of hardware or aesthetics. Easy to install as it came with guides for cutting out, which were pretty much spot on in terms of size. No problems with wiring, USB and power are straight forward. Also there is a useful sticker mount for the temperature probe (Did not use yet as still deciding on where to trunk all the wiring).Operationally it works very well on auto/smart and at the one bar speed level it is whisper quiet and you cannot notice it (I sit about 2.5 meters away from the cabinet. I mounted two T9's as I plan to put a UPS in the other side but just waiting for the sound proofing.It did maintain temperature settings and mode when I turned the power off and back on again, which is a nice touch.Only one packaging quality disappointment (so if you are reading Bernard M), the T9 fan array comes with 4 optional wood screws and in the manual it says that the fan controller should also come with four wood screws, but in both my T9 boxes for the fan controller unit they were missing. Had to use the nuts and bolts which were fine, but form the inside of the cabinet it looks a little ugly.Overall it is a great product that does the job!
Stacy McNeil
Bewertet in Kanada am 3. Dezember 2015
I liked the fan itself. It was quiet and seemed to move a fair amount of air. My problem was with the temperature display. The first time I ordered this model, the display was very crooked. Amazon's return processes was painless as always and I promptly ordered another one. I was very disappointed when the second fan display had the exact same problem. I contacted AC Infinity directly to find out if there was an issue with a certain run etc, but there was still no reply over two weeks later. Unfortunately the lack of customer support made me reluctant to keep it and hope that there wasn't a larger issue with the unit. It's a shame because this item suited my needs perfectly.Update 12/17/2015 - AC Infinity contacted me to tell me that the reason that they did not contact me was a problem with the email address on my form. They promptly addresses that problem. Now that I have a unit that is working as intended I have no problem changing my review to 5 stars. The fan moves a good amount of air and is quiet. The 'smart' mode ramps the fan speed up as the probe temperature is reached so that fan does not always run at high speed. It's a good feature.A company that has good customer support is much more valuable to me than a product that never has an issue and in this case they went out of their way to make it right.
Produktempfehlungen